Kodak 6B8773 manual Test Images

Capture Workflow

Capturing and Evaluating Before your photo session begins, and occasionally during a session, you

Test Images			should capture and evaluate images to be sure that the lighting and camera
			setup are producing the desired results.
	Image Attribute		DCS Pro SLR/c Tool		Suggested Action
	Exposure	Appearance of image on Image LCD			View images and interpret information from
					the tool. Adjust camera settings (aperture,
		Histogram Image mode provides exposure
					shutter speed, ISO) and/or lighting.
		information about the overall image.
					Recapture image, if needed.
		Luminometer provides exposure information
		about a specific area of the image. It shows
		the level of luminance channel saturation of
		pixels below the crosshairs on the Image
		LCD.
	Focus	Zoom Image mode			View the image at 1:1 and evaluate sharpness
					and edge definition in high-contrast areas
					(for example, eyes). Adjust lens focus and/or
					check and adjust the depth of field.
	Color	Click Balance neutralizes color shifts in			Repeat, as necessary, when lighting
		subsequently captured images.			conditions change.
	Scene content and	Appearance of image on Image LCD			Look for undesirable details such as closed
	composition				eyes. Recapture image, if needed.
		Zoom Image mode
Capturing Images			Set up any of the following, as needed:
			•	Vertical Release
			•	Intervalometer
			•	Job Tracker
			•	Self Timer

Press the Shutter button (or the Vertical Shutter button) to capture the image.

April 28, 2004 9-3