Kodak 6B8773 manual Image LCD Exposure is off, ISO are necessary, Turn the camera off, then on

Troubleshooting

Problem	Cause	Remedy
Image contrast is wrong in the		Adjust using the Display Contrast feature (see
Image LCD.		page 11-8).
Exposure is off.		Capture a test image, use the histogram (see
		page 11-3) and zoom to 1:1 (see page 11-4) to
		view luminometer readings and determine if
		exposure adjustments (aperture, shutter speed,
		ISO) are necessary.
Exposure Meter icon blinks in	The Exposure setting is out of	Choose an appropriate exposure value (see
the Top Status LCD.	range.	page 7-7).
Shutter Speed display shows	Lens aperture reset switch is	Replace or repair lens.
"Err" in the Top Status LCD.	defective.
	Main mirror is out of sequence	Turn the camera off, then on.
	with camera firmware.
The Top Status LCD does not light	Battery is exhausted.	Replace the battery (see page 3-4).
up.
Autofocus does not work.	The Focus Mode switch on the	Set the Focus Mode switch on the lens to AF
	lens is set to M.	(see page 8-1).
	The lens is not properly	Mount the lens correctly (see page 2-18).
	mounted.
Difficulty seeing images on the	Image LCD is dirty.	Clean the Image LCD (see page 14-2).
Image LCD
	Image LCD is worn out.	Contact your camera dealer.
No image appears on the external	Video cable is not inserted	Insert the video cable correctly (see
video monitor.	correctly	page 12-1).

C-4 April 28, 2004