Configuring your Camera

card.

IMPORTANT: You must update the camera firmware using a memory card. You cannot update the firmware using the IEEE 1394 interface.

11.Insert the card straight into your camera.

12.Put a fully charged battery in your camera and turn the camera on.

13.Choose Firmware from the Tools menu, then highlight Update.

14. Press the OK button.

A progress screen appears while the firmware is updating. The update takes about 30 seconds.

IMPORTANT: After the firmware has been written to the camera memory, the camera reboots and loads the new firmware. This may take up to fifteen seconds, during which time the camera does not appear to be functioning. Do not adjust camera controls or turn the camera off and on while the rebooting procedure is in progress.

15.When the Image LCD turns back on, press the OK button to acknowledge the update message.

16.Repeat steps 12 - 14 to update the second firmware copy in your camera. When this second update completes, you will not receive the firmware update message.

April 28, 2004

5-7

Page 75
Image 75
Kodak 6B8773 manual Card