Kodak 6B8773 manual Editing an Existing Setup 1. Select a User Setup, Camera Memory

Configuring your Camera

Deleting Setups from	You can save up to ten setups in camera memory. If there are already ten
Camera Memory	setups saved, you must delete one or more setups before new setups can be
	saved or loaded.

1. Choose User Setups from the Tools menu, then choose Saved.

2. Choose Delete, then choose the setup to be deleted.

3. Press the OK button.

4. Press the OK button again to respond to the confirmation screen.

Selecting a User Setup You can select setups that are in camera memory. Once selected, the camera is configured according to that setup.

1.Choose User Setups from the Tools menu, then choose the desired setup.

2.Press the OK button.

It takes about two seconds for the camera to be configured to the new setup.

Editing an Existing Setup 1. Select a User Setup.

2.Change camera settings, as needed.

3.Create a new User Setup (see page 5-14).

4.When the name entry screen appears, it shows the current setup name. Highlight ✔ and press the OK button.

The setup is changed and saved to memory. (You can save it to a card, if needed.)

5-16 April 28, 2004