3-2 April 28, 2004
Powering Your Camera

Powering Your Camera using the Power Module

1. Insert the power module in the battery slot on the camera and turn the
latch clockwise.
2. Insert the power module cable into the power module and into the
port on the charger/adapter.
3. Using the appropriate international power cord, plug the
charger/adapter into an electrical ou tlet.
The Power LED is green when the charger/adapter is po wered.
NOTE: You cannot charge batteries while the power module cable is
connected.

Powering Your Camera using a Battery

Charging Batteries

1. Remove the power module cable from the charger/adapter if it is
connected.
2. Plug the charger/adapter into an electrical outlet.
The Power LED is green when the charger/adapter is po wered.
latch
Power LE
D