Kodak 6B8773 manual Using Job Tracker, Saving a Job Tracker File to a Card

Configuring your Camera

Using Job Tracker

Saving a Job Tracker File to a Card

You can enter International Press Telecommunication Council (IPTC) data on your computer using KODAK PROFESSIONAL DCS Photo Desk Software, then load the data into camera memory where it can be included in image headers. The data follows the IPTC standard. job tracker files have a .IPT extension.

1.Choose Job Tracker from the Tools menu, then choose one of the following:

None—No job tracker data is written to the image headers.

<job tracker file>—Choosing this option writes the job tracker data from the active file to the header of subsequently captured images. This file must have been previously loaded. If no file has been loaded, this option does not appear in the menu.

Load—There can be one active job tracker file at a time. This file can be loaded from a memory card or from camera memory.

2.Press the OK button.

You create and save job tracker files on the computer. Do the following to save a job tracker file to a card so that it can be loaded in your camera:

On the computer:

1.Place a CF card in the computer’s card reader.

2.Using KODAK PROFESSIONAL DCS Photo Desk Software, save the .IPT file to the card.

Alternatively, you can save the file to your hard drive and copy it to a card later.

5-10 April 28, 2004