Kodak 6B8773 manual Safety Warnings, Attachments

Important Information

Warnings

Safety Warnings	• To prevent fire or shock hazard, use only the recommended accessories
	and attachments.

Operational Warnings • Do not use IEEE 1394 repeaters when connecting your camera. Doing so can damage the camera.

•Be sure the connector orientation is correct when you connect the IEEE 1394 cable to the computer. Connecting incorrectly can damage your camera or computer. At the computer connection, the point on the 6-pin plug must align with the point on the computer port.

•Use extreme care when handling memory cards as they are easily damaged. If a card is dropped, all data on the card can be lost.

•Do not remove a memory card, the KODAK PROFESSIONAL DCS Pro Battery, or the KODAK PROFESSIONAL DCS Pro DC Power Module from the camera while the memory card icon on the Digital Status LCD or the Card Busy LED are blinking. The blinking indicates that data is being read from or written to the card. You may lose data if you remove a card at this time.

•Operate your camera only from the type of power source indicated on the name plate of the KODAK PROFESSIONAL DCS Pro DC Power Module. A line voltage outside this range can destroy the power module and/or the camera.

•Use only the KODAK PROFESSIONAL DCS Pro DC Power Module included with your camera or available from Kodak as an accessory. Do not plug other adapters into the camera.

•The KODAK PROFESSIONAL DCS Pro DC Power Module is for indoor use only.

•Do not use the supplied KODAK PROFESSIONAL DCS Pro DC Power Module for any purpose other than for the KODAK PROFESSIONAL DCS Pro SLR/c Digital Camera.

•Use the Image LCD to verify that a picture was captured correctly during your photo session.

•Do not attempt to replace the Focus screen. Return the camera to an authorized KODAK service center if the focus screen needs replacing.

1-2 April 28, 2004