JVC LYT0002-088B manual EN Recordin G Advanced Features, Take Snapshot, Motor Drive mode

26EN RECORDING AdvancedFeatures

Snapshot

Use your camcorder like a regular camera and take a snapshot, or several of them in succession.

Speaker

LCD monitor

	S
C	5
E

R

OFF

YALP

Lock button

Power Dial

PUSH-OPEN

Press SNAPSHOT during recording

SNAPSHOT

Press SNAPSHOT during Record/Standby mode

1 OPEN LCD MONITOR

Press the PUSH-OPENswitch and open the LCD monitor fully.

2 SELECT OPERATION MODE Press the lock button located on the Power Dial and turn the Power Dial to "REC", "5S" or " ".

3 TAKE SNAPSHOT

Press the SNAPSHOT Button. “PHOTO” appears in the LCD monitor, and the image, bordered by a white frame, will be recorded and displayed in the LCD monitor for 6 seconds. The next image then gradually overlaps the snapshot and normal recording resumes.

•When using the Snapshot function from Record/Standby, the camcorder returns to Record/Standby after 6 seconds.

•The sound effect of a shutter closing is recorded together with the image.

Motor Drive mode:

Keeping SNAPSHOT pressed provides an effect similar to serial photography. (The interval between the still pictures: approx. 0.7 seconds).

Changing the Snapshot Setting:

•Still image with no frame can also be recorded (☞ pg. 32).

•When you don't want to hear the shutter sound, set BEEP/TALLY to "NO" in the system menu (☞ pg. 32). Though the sound is not heard from the speaker, it is recorded on the tape.