JVC LYT0002-088B Access Playback Menu, To set parameters for other functions, repeat steps 3

54EN PLAYBACKPlayback Menu

Playback Menu

The Playback Menu allows you to set the following functions: Playback Sound (32 kHz, 48 kHz), Synchro Comp, Display and Time Code. The following procedure applies to all except Synchro Comp (☞ pg. 63, 64).

	LCD monitor
			FULL SOUND
			SOUND 1
4 8kHz MODE		FULL SOUND	SOUND 2
3 2kHz MODE		SOUND 1
SYNCHRO		0 . 0	ON
D I SPLAY		ON
T I ME	CODE	OFF	OFF
	I TEM	–/+ BUTTON	ON
END			OFF
	SET	MENU BUTTON
	Playback Menu		Power Dial
4 8kHz MODE		FULL SOUND
3 2kHz MODE		SOUND 1
SYNCHRO		0 . 0
D I SPLAY		ON
T I ME	CODE	OFF
END	I TEM	–/+ BUTTON
	SET	MENU BUTTON

MENU

1 SELECT OPERATION MODE

First make sure the LCD monitor is open fully. Turn the Power Dial to "PLAY" while pressing down the lock button located on the dial.

2 ACCESS PLAYBACK MENU

Press MENU. The Playback Menu appears in the LCD monitor and on the connected TV.

3 SELECT FUNCTION

Place the pointer next to the desired function by pressing the –/+button, then press MENU. The pointer stops blinking, indicating that the function has been selected.

4 SET FUNCTION PARAMETERS Press the –/+button to cycle through the available settings for the selected function, and stop when the desired setting appears. Then press MENU, and the pointer automatically moves to “END”.

•To set parameters for other functions, repeat steps 3 and 4.

5 CLOSE MENU

Press MENU again, and the menu disappears.