JVC LYT0002-088B Random Assemble Editing, Start Source Playback if Necessary, Press FADE/WIPE

60EN EDITING (Cont.)

Random Assemble Editing

Using the RM-V708U or RM-V710U remote control, you can use P.AE/Effects and make an original edited tape.

			Cable adapter (provided)
	To AUDIO input jacks (L/R)		If your VCR has the 21-pin
		Red	AV input connector
			(SCART), use the provided
	AUDIO/	White	cable adapter.
	VIDEO cables	Yellow
	To AUDIO output	To VIDEO
	jacks (L/R)	input jack
	Red
	White	To S-VIDEO
	Yellow	input jack
			VCR
	To VIDEO output jack	VIDEO OUT
			(Recording deck)
	S-VIDEO cable	select switch
		(Y/C or CVBS)
	To S-VIDEO output jack	To remote pause jack
	Core filter	Editing cable	T W
	To EDIT jack
		RM-V708U or
		RM-V710U
Source tape (Camcorder)	New tape (VCR)

1 MAKE CONNECTIONS

Connect the Docking Station to your VCR and make sure that the playback picture and sound are available on the connected TV (☞ pg. 52).

2 START SOURCE PLAYBACK (IF NECESSARY)

First turn the Power Dial to "PLAY". Press PLAY and then press R.A. EDIT ON/OFF on the remote control. Make sure to point the remote control at the Docking Station's sensor.

•The Random Assemble Editing Menu appears on the TV screen.

3 EXECUTE FADE/WIPE IN (IF NECESSARY)

Press FADE/WIPE.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•You can’t use a Picture Wipe/Dissolve at the beginning of Program 1, or at the end of the last scene.

NOTES:

●When using a JVC VCR with a remote pause terminal, connect the editing jack on the Docking Station to the VCR’s remote pause terminal using an editing cable.

●If you use a JVC VCR not equipped with a remote pause terminal or a non-JVC VCR, connect the Docking Station's editing jack to the remote control's remote pause terminal using an editing cable.

●If the VCR has an S-Video input terminal, connect it using an S-Video cable.

●If the VCR has only one audio input terminal, connect it using a conversion plug (not provided).

●When using the provided cable, make sure you connect the end of the cable with the core filter to the Docking Station.

●Set the VIDEO OUT select switch of connector as required: either to “CVBS” (with the direct VCR connection) or to “Y/C” (with the RGB converter connection).

To Operate The VCR With The Remote Control . . .

..... press and hold SHIFT, then press the

appropriate control button.