JVC LYT0002-088B manual Picture Wipe function doesn’t work

EN 69

SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION

18.The Picture Wipe and Dissolve functions don’t work.

18.•The last selected editing scene is ending.

•At the end of the last selected scene for editing, the Power Dial was set to “OFF”.

•The power is off.

•The previously selected P.AE/Effect was changed after the last selected scene for editing was registered.

•The P.AE/Effects in the Recording Menu were exchanged after the last selected scene for editing was registered.

18.•Select Picture Wipe or Dissolve before beginning recording. The effects are then automatically

activated (☞ pg. 36). •Do not turn off the

camcorder’s power after setting Edit-In and Edit-Out points, as they will all be erased (☞ pg. 36).

•The camcorder automatically shuts off after 5 minutes have elapsed in the Record/ Standby mode. Make sure you continue operations within

5 minutes after engaging Record/Standby mode (☞ pg. 19).

•Make sure you have selected the P.AE/Effects you want before starting editing (☞ pg. 40).

•Exchanging P.AE/Effects may deactivate the effect(s) you selected. Once you’ve selected an effect, do not perform an exchange before beginning editing. If you do, make sure you don’t replace the effect(s) you selected (☞ pg. 40).

19.The Picture Wipe function doesn’t work.

19.•The Slow (Slow Shutter) effect is activated.

•The Squeeze or Cinema mode is selected in the Recording Menu.

19.•Make sure the Squeeze mode, Cinema mode, or Slow effect is not activated when preparing to use the

Picture Wipe function (☞ pg. 31, 41).

20.Even when Slow (Slow Shutter) isn't selected, the image looks like it is activated.

20.•When shooting in the dark with GAIN UP set to A, the unit becomes highly sensitive to light and the image takes on an effect similar to Slow (Slow Shutter).

20.•If you want the lighting to look more natural, set GAIN UP to "AGC" or

"OFF" in the Recording Menu (☞ pg. 31).

21.The Video Echo effect doesn’t work.

21.•The Picture Wipe or Dissolve functions are in use.

•The Squeeze mode is selected in the Recording Menu.

•Snapshot Dissolve is in progress.

•A Fade-In or Fade-Out is in progress (White Fader, Black Fader or Black & White Fader).

21.•Make sure the Squeeze mode is set to “OFF”

(☞ pg. 31).

•Do not try to use the Video Echo effect during a Fade-In or Fade-Out

(☞ pg. 35).

CONTINUED ON NEXT PAGE