JVC LYT0002-0R1A, 0797TOV*UN*SN manual FADE/WIPE Effects, Access FADER/WIPE Menu, Select Effect

36EN RECORDINGAdvanced Features (Cont.)

FADE/WIPE Effects

Use these to spice up the transition from one scene to the next. You can also vary transitions from scene to scene. Refer to pages 36 – 41 for Fade/Wipe effects and techniques.

Select any one effect from the Fader/Wipe Menu.

Display

FOCUS	AUTO	FADER / WIPE
EXPOSURE	AUTO			P	WIPE – SHUTTER
W. BALANCE	AUTO		? R		RANDOM
4FADER	OFF				OFF
/ WIPE		SEL. 4	WH		FADER – WHITE
P. AE	OFF		BK		FADER – BLACK
/ EFFECT	0		B W		FADER – B.W
FLASH ADJ.					FADER – MOSAIC

MANUAL

WH

PAUSE

RETURN

Manual Mode Item Menu

Select Dial

Fader/Wipe Menu

5S			Lock button
M	OFFYA		Power Dial
A		P
	L

START/STOP button

1 SELECT OPERATION MODE

First turn the Power Dial to “ M ” while pressing down the lock button located on the dial, make sure the LCD monitor is open fully or the viewfinder is pulled out.

2 ACCESSMENU MANUAL MODE ITEM

Press the Select Dial.

3 ACCESS FADER/WIPE MENU

Move the pointer and highlight bar to “FADER/ WIPE” by rotating the Select Dial and then press it. The Fader/Wipe Menu appears.

4 SELECT EFFECT

Move the pointer and highlight bar to the desired effect by rotating the Select Dial, then press it.

•The Fader/Wipe Menu disappears and the effect is reserved. The indicator representing the selected effect appears.

5 START RECORDING

Press START/STOP to start recording and activate fade- or wipe- in

OR...

END RECORDING

Press START/STOP to end recording and activate fade- or wipe- out.

6 TO CANCEL FADE/WIPE EFFECTS

In step 4, move the pointer and highlight bar to “OFF”. Press the Select Dial.

NOTE:

If certain P.AE/Effects (☞ pg. 42) are activated, some Fade/Wipe Effects cannot be used. If you select a Fade/Wipe Effect that is unusable in the current situation, the indication blinks.