JVC LYT0002-0R1A, 0797TOV*UN*SN Random Assemble Editing, Make Connections, Start Source Playback

60EN EDITING (Cont.)

Random Assemble Editing

Using the RM-V711U remote control, you can use P.AE/Effects and make an original edited tape.

	To AUDIO input jacks (L/R)		Cable adapter (provided)
			If your VCR has the 21-pin
		Red
			AV input connector
		White	(SCART), use the provided
	VIDEO/AUDIO		cable adapter.
		Yellow
	cable (provided)
	To AUDIO output	To VIDEO
		input jack
	jacks (L/R)
	Red	To S-VIDEO
	White
		input jack
	Yellow
				VCR
	To VIDEO output jack	VIDEO OUT
			(Recording deck)
	S-VIDEO cable (provided)	select switch
		(Y/C or CVBS)
	To S-VIDEO output jack	To remote pause jack		RM-V711U
	Remote sensor
		Editing cable
	Core filter			T W
		(provided)
			PLAY
	To EDIT jack	R.A. EDIT
		ON/OFF
Source tape (Camcorder)	New tape (VCR)

1 MAKE CONNECTIONS

Connect the Docking Station to your VCR and make sure that the playback picture and sound are available on the connected TV (☞ pg. 56, 57).

•Connections should be made while the power is off. Making connections with the power on can lead to electrical shock or malfunctions.

2 START SOURCE PLAYBACK

First turn the Power Dial to “PLAY”. Press PLAY and then press R.A. EDIT ON/OFF on the remote control. Make sure to point the remote control at the camcorder's remote sensor.

•The Random Assemble Editing Menu appears on the TV screen or the LCD monitor.

3 EXECUTE FADE/WIPE IN (IF NECESSARY)

Press FADE/WIPE on the remote control.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•You can’t use a Picture Wipe/Dissolve at the beginning of Program 1.

NOTES:

●When using a JVC VCR with a remote pause terminal, connect the editing jack on the Docking Station to the VCR’s remote pause terminal using an editing cable.

●If you use a JVC VCR not equipped with a remote pause terminal or a non-JVC VCR, connect the Docking Station's editing jack to the remote control's remote pause terminal using an editing cable.

●Set the VIDEO OUT select switch of the cable adapter as required:

Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an S-VIDEO cable.

CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.

●Before Random Assemble Editing, make sure the indications don't appear on the TV monitor. If they appear during Random Assemble Editing, they will be recorded onto the new tape. To clear the Playback Sound Mode Display, press DISPLAY on the RM-

V711U Remote Control. Select “DISPLAY” and “TIME CODE” from the Playback Menu (☞ pg. 52) to show or hide the Date/Time and the Time Code on the recording. To show or hide all indications except for the Random Assemble Editing Menu, press the IND.ON/OFF button on the camcorder for longer than 1 second. When Random Assemble Editing starts, its indications disappear and are not recorded on the new tape.