JVC LYT0002-0R1A, 0797TOV*UN*SN manual AE/Effects, Disable P.AE/EFFECT

• The P.AE/Effects Menu disappears and the selected mode is activated. The symbol of the selected mode appears.

Move the pointer and highlight bar to the desired effect by rotating the Select Dial, then press it.

SELECT EFFECT

3 ACCESS P.AE/EFFECTS SELECT MENU Press the Select Dial. The P.AE/Effects Menu appears.

4

1 SELECT OPERATION MODE

First turn the Power Dial to “ M ” while pressing down the lock button located on the dial, make sure the LCD monitor is open fully or the viewfinder is pulled out.

2 ACCESSMENU MANUAL MODE ITEM Press the Select Dial and move the pointer and highlight bar to "P.AE/EFFECT" by rotating the Select Dial.

RETURN

Manual Mode Item Menu

42EN RECORDINGAdvanced Features (Cont.)

P.AE/Effects

You can choose any one of the effects from the P.AE/Effects Menu.

Display

FOCUS	AUTO
EXPOSURE	AUTO
W. BALANCE	AUTO
FADER	OFF
/ WIPE
4P. AE	OFF
/ EFFECT	0
FLASH ADJ.

P. AE / EFFECT
2	SLOW X 10
	VIDEO ECHO
	OFF
SEL. 41/50	SHUTTER 1/50
1/100	SHUTTER 1/100
1/250	SHUTTER 1/250
1/500	SHUTTER 1/500

PAUSE

P.AE/EFFECTS Menu	The indicator for the selected
	mode appears, and the selected
	mode is engaged.

Lock button

Power Dial

5S
M	OFFYA
A		P
	L

Select Dial

5 DISABLE P.AE/EFFECT

To turn off the selected effect, re-access the P.AE/Effects Menu and move the pointer and highlighlt bar to “OFF” by rotating the Select Dial. Then press it.

NOTES:

●P.AE/Effects can be changed during recording or during Record-Standby.

●If certain Fades or Wipes (☞ pg. 36 – 41) are activated, some P.AE/Effects cannot be used. If you select a P.AE/Effect that is unusable in the current situation, the effect’s symbol begins flashing.