52EN PLAYBACKPlayback Menu
Playback Menu
The Playback Menu allows you to set the following functions:
Playback Sound (32 kHz, 48 kHz), Synchro Comp, Display and Time Code. The following procedure applies to all except Synchro Comp (☞ pg. 63, 64).
Display
MENU
|
| FULL SOUND |
|
| SOUND2 |
48kHz MODE | FULL SOUND | SOUND1 |
32kHz MODE | SOUND1 |
|
SYNCHRO | 0 . 0 | ON |
DISPLAY | ON | |
TIMECODE | OFF | OFF |
|
| |
|
| ON |
4END |
| OFF |
Playback Menu |
| |
448kHz MODE | FULL SOUND |
|
32kHz MODE | SOUND1 |
|
SYNCHRO | 0 . 0 |
|
DISPLAY | ON |
|
TIMECODE | OFF |
|
Power Dial
MENU button
| M |
A | 5S |
OFF |
|
Y |
|
A |
|
L |
|
P |
|
Lock button
Select Dial
END
1 SELECT OPERATION MODE First turn the Power Dial to “PLAY” while pressing down the lock button located on the dial. Open the LCD monitor fully.
2 ACCESS PLAYBACK MENU
Press MENU. The Playback Menu appears in the LCD monitor and on the connected TV.
3 SELECT FUNCTION
Move the pointer and highlight bar to the desired function by rotating the Select Dial. Press the Select Dial to activate.
4 SET FUNCTION PARAMETERS Rotate the Select Dial to cycle through the available settings for the selected function, and stop when the desired setting appears. Then press the Select Dial, and the pointer and highlight bar automatically move to “END”.
•To set parameters for other functions, repeat steps 3 and 4.
5 CLOSE MENU
Press the Select Dial again, and the menu disappears.