JVC LYT0002-0R1A, 0797TOV*UN*SN Engagemode Vcrs RECORD-PAUSE, Start Editing, Stop Editing, Button

62EN EDITING (Cont.)

IN OUT MODE

1WH 0 0 : 2 5 ~ 0 2 : 0 5 P – –

2P 0 7 : 1 8 ~ 0 8 : 3 1 – –

3– – 0 3 : 3 3 ~ 0 5 : 5 3 B/W

4 0 9 : 3 0 ~ 1 3 : 1 5

5 1 5 : 5 5 ~ 1 6 : 2 0 – – – –

6– – – – : – – ~

7~

8~

TIME CODE	1 6	: 3 0
TOTAL	9	: 3 9

Random Assemble Editing menu

RM-V711U

(provided) T W

	M
A	5S
OFFY
A
L
P

Remote Sensor

Power Dial

Rewind button

Stop button

FADE/WIPE
EFFECT	PAUSE	START/STOP
EDIT IN/OUT	R.A. EDIT ON/OFF	button
CANCEL	VCR REC STBY

8 REGISTER ADDITIONAL SCENES Repeat steps 4 – 7 (☞ pg. 61).

•To change previously registered points, press CANCEL on the remote control. The registered points disappear, one at a time, from the most recently registered point.

9 PREPARE SOURCE TAPE Rewind the tape in the camcorder to the beginning of the scene you want to edit and press the Pause button.

10 ENGAGEMODE VCR'S RECORD-PAUSE

Point the remote control towards the VCR’s remote sensor and press VCR REC STBY, or manually engage the VCR’s Record-Pause mode.

11 START EDITING

Press the START/STOP button on the camcorder. Editing proceeds as programmed, right through to the end of the last registered scene.

•When dubbing is complete, the camcorder enters the Pause mode, and the recorder enters its Record-Standby mode.

•If you don’t register an Edit-Out point, the tape will be dubbed all the way to the end automatically.

12 STOP EDITING

Engage the Stop modes for the camcorder and the recorder.

To make the R.A. Edit counter display disap- pear, press R.A. EDIT ON/OFF on the remote control.

NOTES:

●When the editing cable is connected to the Pause terminal during dubbing, make sure the remote control is pointed at the recorder’s sensor, and that the path between the two is unobstructed.

●If, during Random Assemble Editing, you press any button on the camcorder, its Record-Standby mode is automatically engaged.

●Random Assemble Editing may not function properly when using a tape including several duplicated Time Codes. (☞ pg. 21).