
Dubbing To Or From A VCR
To Use This Camcorder As A Player
1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 16.
2 Set the VIDEO/MEMORY Switch 4 to “VIDEO”, then set the camcorder’s Power Switch u to “PLAY” while pressing down the Lock Button y located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.
3 Engage the VCR’s AUX and
4 Engage the camcorder’s Play mode to find a spot just before the
5 Press 4/6 7 on the camcorder and engage the VCR’s Record mode.
6 Engage the VCR’s
7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.
NOTES:
● As the camcorder starts to play your footage it will appear |
on your TV. This will confirm the connections and the AUX |
3.Connect the cables as shown in the illustration and load a cassette to record on.
4.Press the Recording Start/Stop button e to engage the
5.Press the Recording Start/Stop button e to start recording. 3 rotates.
6.Press the Recording Start/Stop button e again to engage the 3 stops rotating.
NOTES:
●To use an output cable adapter (commercially available), refer to its instructions.
●After dubbing, set “S/AV INPUT” back to “OFF”.
●Analogue signals can be converted to digital signals with this procedure.
●It is also possible to dub from another camcorder.
To AV (
Connector
cover*
channel for dubbing purposes. |
● Before you start dubbing, make sure that the indications |
do not appear on the connected TV. If they do, they are |
being recorded onto the new tape. |
● Set the video out select switch of the cable adapter as |
required: |
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an
CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.
To
Audio/Video cable (provided)
To AUDIO, VIDEO** and
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the
Menu Screen ( pg. 30, 32).
Or, press DISPLAY ; on the remote control to turn on/off the date indication.
•Time Code
..... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen ( pg. 31, 32).
•Indications other than date/time and time code
..... set “ON SCREEN” to “LCD”, “LCD/TV” or “OFF” in
the Menu Screen ( pg. 30, 32).
To Use This Camcorder As A Recorder (GR-D70 only)
1.Set the VIDEO/MEMORY Switch 4 to “VIDEO”, then set the camcorder’s Power Switch u to “PLAY” while pressing down the Lock Button y located on the switch.
2.Set “S/AV INPUT” to “ON” and set “REC MODE” to “SP” or “LP” ( pg. 31).
Cable
Adapter***
TV
VCR
*When connecting the cables, open this cover.
**Connect when an
***If your VCR has a SCART connector
To use this camcorder as a player ➝ use the provided cable adapter.
To use this camcorder as a recorder
EN