JVC LYT1145-001A manual Night-Scope, Programme AE With Special Effects

Page 23

Night-Scope

Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed.

1 Set the Power Switch u to “ ” while pressing down the Lock Button y located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.

2 Press NIGHT 0 so that the Night-Scope indicator “ ” * appears.

•The shutter speed is automatically adjusted to provide up to 30 times sensitivity.

•“A” appears beside “ ” * while the shutter speed is being automatically adjusted.

To Deactivate Night-Scope . . .

..... press NIGHT 0 again so that the Night-Scope

indicator disappears.

NOTES:

●During Night-Scope, the following functions or settings cannot be activated and its indicator blinks or goes out:

•Some modes of “Programme AE With Special Effects” ( pg. 23).

•“GAIN UP” in the CAMERA Menu ( pg. 29).

•“DIS” in the MANUAL Menu ( pg. 29).

●During Night-Scope, it may be difficult to bring the camcorder into focus. To prevent this, use of manual focus and/or a tripod is recommended.

Programme AE With Special Effects

1 Set the Power Switch u to “ ” while pressing down the Lock Button y located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.

2 Press the MENU/VOLUME wheel % in. The Menu Screen appears.

3 Rotate the MENU/VOLUME wheel % to select “ PROGRAM AE”, then press it.

4 Rotate the MENU/VOLUME wheel % to select the desired mode, then press it. Selection is complete. Press the MENU/VOLUME wheel % in again. The Menu Screen closes.

•The PROGRAM AE Menu disappears and the selected mode is activated. The selected mode indicator appears.

To Deactivate The Selected Mode . . .

..... select “OFF” in step 4.

IMPORTANT

Some modes of Programme AE with special effects cannot be used with certain Fade/Wipe Effects ( pg. 24). If an unusable mode is selected, its indicator blinks or goes out.

NOTES:

●Programme AE with special effects can be changed during recording or during Record-Standby.

●Some modes of Programme AE special effects cannot be used during Night-Scope.

SHUTTER

1/50: The shutter speed is fixed at 1/50th of a second. Black bands that usually appear when shooting a TV screen become narrower.

1/120: The shutter speed is fixed at 1/120th of a second. The flickering that occurs when shooting under a fluorescent light or mercury-vapour lamp is reduced.

SPORTS

(Variable Shutter Speed: 1/250 – 1/4000)

This setting allows fast-moving images to be captured one frame at a time, for vivid, stable slow-motion playback. The faster the shutter speed, the darker the picture becomes. Use the shutter function under good lighting conditions.

SNOW

Compensates for subjects that may otherwise appear too dark when shooting in extremely bright surround- ings such as in the snow.

SPOTLIGHT

Compensates for subjects that may otherwise appear too bright when shooting under extremely strong direct lighting such as spotlights.

NOTE:

“SPOTLIGHT” has the same effect as –3 with the exposure control ( pg. 26).

TWILIGHT

Makes evening scenes look more natural.

White Balance ( pg. 27) is initially set to , but can be changed to your desired setting. When Twilight is chosen, the camcorder automatically adjusts the focus from approx. 10 m to infinity. From less than 10 m, adjust the focus manually.

SEPIA

Recorded scenes have a brownish tint like old photos. Combine this with the Cinema mode for a classic look.

MONOTONE

Like black and white films, your footage is shot in B/W. Used together with the Cinema mode, it enhances the “classic film” effect.

CLASSIC FILM

Gives recorded scenes a strobe effect.

STROBE

Your recording looks like a series of consecutive snapshots.

EN

FOR RECORDING 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents GR-D70 GR-D60 Contents Blue to N Neutral or Black Brown to L Live or Red Dear CustomerBefore recording an important scene Some DO’S and DON’TS on the Safe USE of EquipmentSlot Make sure the arrow is Pointing upwardAC Adapter AP-V11E or AP-V13E Lens Cap See below for attachmentSub Menu StopperWind once Using AC Power PowerCharging the Battery Pack Using the Battery PackAbout Batteries Grip AdjustmentViewfinder Adjustment Lithium-ion is vulnerable in colder temperaturesLoading/Unloading a Cassette Approximate recording time Tape Recording modeShoulder Strap Attachment Tripod MountingScreen closes Date/Time SettingsRecording Mode Setting Display Loading a Memory Card Picture Quality/Image Size SettingTo Unload a Memory Card Label Clipped edge Memory cardLCD monitor fully To Adjust The Brightness Of The DisplayShooting while using the LCD monitor Open Basic RecordingSelf-Recording Operation ModePower-Linked Operation Journalistic ShootingNormal Playback To Control The Speaker VolumeTime Code Recording from the Middle of a TapePress To cancel Blank Search midwayBlank Search Press Blank SearchConnections If using a VCR . . . go to step If not . . . go to stepTo AV Connector cover Cvbs video out select switch To TV or VCRTo Protect Valuable Files available only for SD Memory Card Basic Shooting SnapshotTo Delete Unwanted Still Images To Remove The Shutter SoundMemory Card Recording Memory Card Playback Approximate Number of Storable ImagesMultiMediaCard To Magnify The Stored ImagesRemoving On-Screen Display Viewing File InformationAuto Playback Index Playback To Remove Protection Advanced Features Protecting Files Deleting Files To Print ALL Still Images ONE Print for Each Setting Print Information Dpof SettingTo Reset The Setting Dubbing Still Images Recorded On a Tape To a Memory CardFolder and File names To Reset The No. Of PrintsInitialising a Memory Card Making a New FolderProgramme AE With Special Effects Night-ScopeFade/Wipe Effects Auto Focus Snapshot Mode SelectionSnapshot For Tape Recording Snapshot RecordingTo Brighten The Subject Quickly Manual FocusExposure Control To Return To Automatic Exposure ControlManual White Balance Operation White Balance AdjustmentIris Lock Balance WIPE/FADERProgram AE ExposureManual Camera Display SystemVideo DSCFor Playback Menu Bright , DATE/TIME , Time Code Video DisplayPlayback Sound DisplayDubbing Dubbing To Or From a VCRTo Use This Camcorder As a Player To Use This Camcorder As a Recorder GR-D70 onlyDV cable Optional Core filter To DV Video unit equipped with DV connectorTo Use This Camcorder As a Recorder GR-D70 only To DV @ Core filterPlayback Special Effects Using the Remote Control UnitSlow-Motion Playback Frame-By-Frame PlaybackTo hear the dubbed sound during playback Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing Insert EditingMake Connections Random Assemble Editing R.A.EditSET REMOTE/VCR Code Select Scenes Diagnosing VCR/CAMCORDER Timing Adjustment of VCR/CAMCORDER TimingAutomatic Editing to VCR For More Accurate EditingConnection To a Personal Computer Using USB cableUsing DV cable Using USB cableImage taken using Snapshot is too dark No power is suppliedFocus does not adjust automatically Snapshot mode cannot be usedDate/time does not appear Black & White Fader does not workImage looks like the shutter speed is too Slow White Balance cannot be activatedMemory card cannot be played back Charger indicator on the camcorder does Not lightAn error indication E01, E02 or E06 appears An error indication E03 or E04 appearsMemory Cards Battery PacksCassettes Main Unit How to handle a CD-ROMLCD Monitor About moisture condensation For Your MaintenanceCleaning The Camcorder After UseAC Adapter CamcorderLCD monitor Stereo Microphone Speaker Controls, Connectors And IndicatorsRemote Control IndexAudio/Video Input GR-D70 only Power Switch  pg pg @ Digital Video Input GR-D70 only1024 During Both Tape And Memory Card Recording LCD Monitor/Viewfinder Indications2b i t / SOUND1 During Memory Card Recording OnlyAppears when Digital Image Stabiliser DIS is Appears when in the Squeeze or Cinema modeAppears when the Insert Editing w or Insert Editing Displays the sound mode for approx seconds afterCassette Appears when no tape is loadedAppears when the tape ends during recording or playback HighAppears if a file in another format is selected E01, E02 or E06 Unit in Safeguard ModeE03 or E04 Unit in Safeguard Mode Eject RM-V717U optional Using The Optional RM-V717U Remote Control UnitTerms See previous page as well
Top Page Image Contents