JVC LYT1145-001A manual Select Scenes

Page 38

●Make sure to set “S/AV INPUT” to “OFF” in the Menu Screen (GR-D70 only,  pg. 31).

●Set the video out select switch of the cable adapter as

required:

Y/C : When connecting to a TV or VCR which accepts

Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.

●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of an S-Video cable and audio/video cable.

 

To AV (

 

Connector

 

cover**

 

To

 

S-VIDEO q

To EDIT )

Audio/Video cable

S-Video cable

(provided)

 

(optional)

 

 

To AUDIO, VIDEO*

 

and -IN

Editing cable***

connectors

 

“Y/C”/“CVBS”

If your VCR has the

video out

SCART connector,

select switch

use the provided

cable adapter.

To Remote PAUSE or R.A.EDIT

SELECT SCENES

4 Point the remote control at the camcorder’s remote sensor. Press PLAY (4) ) and then press R.A.EDIT ON/OFF r on the remote control.

The Random Assemble Editing Menu appears.

 

 

 

I N

OUT

MODE

Random

 

 

1 – – – – : – –

~

 

 

 

2

 

~

 

Assemble

 

 

3

 

~

 

Editing Menu

Programme

 

4

 

~

 

 

5

 

~

 

 

 

 

6

 

~

 

 

 

 

7

 

~

 

 

 

 

8

 

~

 

 

 

 

 

T I ME CODE

– – : – –

 

 

 

 

 

TOTAL

00 : 00

 

 

5 If using a Fade/Wipe at the beginning of the scene, press FADE/WIPE 9 on the remote control.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

6 At the beginning of the scene, press EDIT IN/OUT

@on the remote control. The Edit-In position appears in the Random Assemble Editing Menu.

7 At the end of the scene, press EDIT IN/OUT @. The Edit-Out position appears in the Random Assemble Editing Menu.

8 If using a Fade/Wipe at the end of the scene, press FADE/WIPE 9.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•If you select a Fade/Wipe effect for an Edit-Out point, the effect is automatically applied to the following Edit-In point.

•When you use Fade/Wipe effects, that time is included in the total time.

9 If using Playback Special Effects, press EFFECT ! ( pg. 35).

To PAUSE IN $

 

 

4

9

)

!

r

@

#

 

VCR

TV

10 Repeat steps 6 through 9 to register additional scenes.

•To change previously registered points, press CANCEL # on the remote control. The registered points disappear, one at a time, from the most recently registered point.

•If you are not using Fade/Wipe or Programme AE with special effects, repeat steps 6 and 7 only.

NOTES:

*Connect when an S-Video cable is not used.

**When connecting cables, open this cover.

***Provided with the optional Remote Control kit RM-V717KITU.

EN

●When choosing a scene, set Edit-In and Edit-Out points so that there is a relatively large difference between them.

●If the search time for an in-point exceeds 5 minutes, the recording deck’s Record-Standby mode will be cancelled and editing will not take place.

●If there are blank portions before or after the Edit-In and Edit-Out points, a blue screen may be included in the edited version.

●Since time codes register time only as accurately as seconds, the time code total time may not match the total programme time exactly.

●Turning off the camcorder’s power erases all registered Edit-In and Edit-Out points.

38 USING THE REMOTE CONTROL UNIT

Page 37 Page 39
Image 38
Page 37 Page 39
Contents GR-D70 GR-D60 Contents Dear Customer Blue to N Neutral or Black Brown to L Live or RedSome DO’S and DON’TS on the Safe USE of Equipment Before recording an important sceneLens Cap See below for attachment Make sure the arrow is Pointing upwardAC Adapter AP-V11E or AP-V13E SlotSub Menu StopperWind once Using the Battery Pack PowerCharging the Battery Pack Using AC PowerLithium-ion is vulnerable in colder temperatures Grip AdjustmentViewfinder Adjustment About BatteriesTripod Mounting Approximate recording time Tape Recording modeShoulder Strap Attachment Loading/Unloading a CassetteScreen closes Date/Time SettingsRecording Mode Setting Label Clipped edge Memory card Loading a Memory Card Picture Quality/Image Size SettingTo Unload a Memory Card DisplayBasic Recording To Adjust The Brightness Of The DisplayShooting while using the LCD monitor Open LCD monitor fullyJournalistic Shooting Operation ModePower-Linked Operation Self-RecordingRecording from the Middle of a Tape To Control The Speaker VolumeTime Code Normal PlaybackPress Blank Search To cancel Blank Search midwayBlank Search PressCvbs video out select switch To TV or VCR If using a VCR . . . go to step If not . . . go to stepTo AV Connector cover ConnectionsTo Remove The Shutter Sound Basic Shooting SnapshotTo Delete Unwanted Still Images To Protect Valuable Files available only for SD Memory CardTo Magnify The Stored Images Approximate Number of Storable ImagesMultiMediaCard Memory Card Recording Memory Card PlaybackIndex Playback Viewing File InformationAuto Playback Removing On-Screen DisplayTo Remove Protection Advanced FeaturesProtecting Files Deleting Files Dubbing Still Images Recorded On a Tape To a Memory Card Setting Print Information Dpof SettingTo Reset The Setting To Print ALL Still Images ONE Print for EachMaking a New Folder To Reset The No. Of PrintsInitialising a Memory Card Folder and File namesNight-Scope Programme AE With Special EffectsFade/Wipe Effects Snapshot Recording Snapshot Mode SelectionSnapshot For Tape Recording Auto FocusTo Return To Automatic Exposure Control Manual FocusExposure Control To Brighten The Subject QuicklyManual White Balance Operation White Balance AdjustmentIris Lock Exposure WIPE/FADERProgram AE BalanceManual System Camera DisplayVideo DSCFor Playback Menu Display Video DisplayPlayback Sound Bright , DATE/TIME , Time CodeTo Use This Camcorder As a Recorder GR-D70 only Dubbing To Or From a VCRTo Use This Camcorder As a Player DubbingTo DV @ Core filter Video unit equipped with DV connectorTo Use This Camcorder As a Recorder GR-D70 only DV cable Optional Core filter To DVFrame-By-Frame Playback Using the Remote Control UnitSlow-Motion Playback Playback Special EffectsInsert Editing Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing To hear the dubbed sound during playbackMake Connections Random Assemble Editing R.A.EditSET REMOTE/VCR Code Select Scenes For More Accurate Editing Adjustment of VCR/CAMCORDER TimingAutomatic Editing to VCR Diagnosing VCR/CAMCORDER TimingUsing USB cable Using USB cableUsing DV cable Connection To a Personal ComputerSnapshot mode cannot be used No power is suppliedFocus does not adjust automatically Image taken using Snapshot is too darkWhite Balance cannot be activated Black & White Fader does not workImage looks like the shutter speed is too Slow Date/time does not appearAn error indication E03 or E04 appears Charger indicator on the camcorder does Not lightAn error indication E01, E02 or E06 appears Memory card cannot be played backMemory Cards Battery PacksCassettes Main Unit How to handle a CD-ROMLCD Monitor After Use For Your MaintenanceCleaning The Camcorder About moisture condensationCamcorder AC AdapterIndex Controls, Connectors And IndicatorsRemote Control LCD monitor Stereo Microphone Speaker@ Digital Video Input GR-D70 only Power Switch  pg pg Audio/Video Input GR-D70 onlyDuring Memory Card Recording Only LCD Monitor/Viewfinder Indications2b i t / SOUND1 1024 During Both Tape And Memory Card RecordingDisplays the sound mode for approx seconds after Appears when in the Squeeze or Cinema modeAppears when the Insert Editing w or Insert Editing Appears when Digital Image Stabiliser DIS isHigh Appears when no tape is loadedAppears when the tape ends during recording or playback CassetteAppears if a file in another format is selected E01, E02 or E06 Unit in Safeguard ModeE03 or E04 Unit in Safeguard Mode Eject Using The Optional RM-V717U Remote Control Unit RM-V717U optionalTerms See previous page as well
Top Page Image Contents