JVC LYT1145-001A manual Slow-Motion Playback, Frame-By-Frame Playback, Playback Special Effects

Page 35

Make sure “REMOTE” in the SYSTEM Menu is set to “ON” ( pg. 30) and the remote control is pointed at the remote sensor 1. The transmitted beam’s approximate effective distance for indoor use is 5m.

Slow-Motion Playback

To allow slow-speed search in either direction during tape playback.

1 To change from normal to Slow-Motion Playback, press SLOW (9) I or (0) h more than approx. 2 seconds. After approx. 5 minutes (approx. 20 seconds with an 80-minute cassette) in Slow Rewind or approx. 5 minutes in Slow Forward, normal playback resumes.

To stop Slow-Motion Playback, press PLAY (4) k.

NOTES:

You can also engage Slow-Motion Playback from Still Playback by pressing SLOW I h more than approx.

2 seconds.

During Slow-Motion Playback, due to digital image processing, the picture may take on a mosaic effect.

After SLOW (9) I or (0) h is pressed and held, the still image may be displayed for a few seconds, followed by a blue screen for a few seconds. This is not a malfunction.

There may be a small margin between the slow-motion playback start point you chose and the actual start point for Slow-Motion Playback.

During Slow-Motion Playback, there will be disturbances in video and the picture may seem unstable, especially with steady images. This is not a malfunction.

During Slow-Motion Playback, press PAUSE (6) U to pause playback.

R

Td

Y

U

9

6

0

g f

I

O

2

4

3

j

h

P

a

w

5

e

l

k

 

s

 

 

 

;

 

T

 

A

 

 

 

 

 

W

 

 

S

Frame-By-Frame Playback

To allow frame-by-frame search during tape playback.

1 To change from normal to Frame-By-Frame Playback, press SLOW (0) h repeatedly for forward or SLOW (9) I repeatedly for reverse. Each time it is pressed, the frame is played back.

NOTE:

You can also engage Frame-By-Frame Playback from Still Playback by pressing SLOW (9) I or (0) h repeatedly.

Playback Special Effects

To allow you to add creative effects to the playback image.

1 To start playback, press PLAY (4) k.

2 Point the remote control at the camcorder’s remote sensor and press EFFECT g. The PLAYBACK EFFECT Select Menu appears.

3 Move the highlight bar to the desired effect by pressing EFFECT g. The selected function is activated and after 2 seconds the menu disappears.

To deactivate the selected effect, press ON/OFF f on the remote control. Pressing it again re-activates the selected effect.

To change the selected effect, repeat from step 2 above.

NOTE:

The effects that can be used during playback are Classic Film, Monotone, Sepia and Strobe. The effects work the same in playback as they did in recording. Refer to page 23 for more information.

Playback Zoom

To magnify the recorded image up to 44X at any time during playback.

1 Press PLAY (4) k to find the scene of interest.

2 Press the Zoom Button T A or W S on the remote control. Make sure the remote control is pointed at the camcorder's remote sensor. Pressing T A zooms in.

3 You can move the image on screen around to find a particular portion of the picture. While holding down SHIFT s, press * (Left) O, T(Right) j, ^ (Up) U and & (Down) a.

To end zoom, press and hold W S until magnification returns to normal. Or, press STOP (5) a and then press PLAY (4) k.

NOTES:

Zoom can also be used during slow-motion and still playback.

Due to ditital image processing, the quality of the image may suffer.

Normal playback

 

Press T A

 

 

 

To move image, press T (Right) j while keeping SHIFT s held down.

EN

USING THE REMOTE CONTROL UNIT 35

Image 35
Contents GR-D70 GR-D60 Contents Blue to N Neutral or Black Brown to L Live or Red Dear CustomerBefore recording an important scene Some DO’S and DON’TS on the Safe USE of EquipmentSlot Make sure the arrow is Pointing upwardAC Adapter AP-V11E or AP-V13E Lens Cap See below for attachmentSub Menu StopperWind once Using AC Power PowerCharging the Battery Pack Using the Battery PackAbout Batteries Grip AdjustmentViewfinder Adjustment Lithium-ion is vulnerable in colder temperaturesLoading/Unloading a Cassette Approximate recording time Tape Recording modeShoulder Strap Attachment Tripod MountingScreen closes Date/Time SettingsRecording Mode Setting Display Loading a Memory Card Picture Quality/Image Size SettingTo Unload a Memory Card Label Clipped edge Memory cardLCD monitor fully To Adjust The Brightness Of The DisplayShooting while using the LCD monitor Open Basic RecordingSelf-Recording Operation ModePower-Linked Operation Journalistic ShootingNormal Playback To Control The Speaker VolumeTime Code Recording from the Middle of a TapePress To cancel Blank Search midwayBlank Search Press Blank SearchConnections If using a VCR . . . go to step If not . . . go to stepTo AV Connector cover Cvbs video out select switch To TV or VCRTo Protect Valuable Files available only for SD Memory Card Basic Shooting SnapshotTo Delete Unwanted Still Images To Remove The Shutter SoundMemory Card Recording Memory Card Playback Approximate Number of Storable ImagesMultiMediaCard To Magnify The Stored ImagesRemoving On-Screen Display Viewing File InformationAuto Playback Index PlaybackTo Remove Protection Advanced FeaturesProtecting Files Deleting Files To Print ALL Still Images ONE Print for Each Setting Print Information Dpof SettingTo Reset The Setting Dubbing Still Images Recorded On a Tape To a Memory CardFolder and File names To Reset The No. Of PrintsInitialising a Memory Card Making a New FolderProgramme AE With Special Effects Night-ScopeFade/Wipe Effects Auto Focus Snapshot Mode SelectionSnapshot For Tape Recording Snapshot RecordingTo Brighten The Subject Quickly Manual FocusExposure Control To Return To Automatic Exposure ControlManual White Balance Operation White Balance AdjustmentIris Lock Balance WIPE/FADERProgram AE ExposureManual Camera Display SystemVideo DSCFor Playback Menu Bright , DATE/TIME , Time Code Video DisplayPlayback Sound DisplayDubbing Dubbing To Or From a VCRTo Use This Camcorder As a Player To Use This Camcorder As a Recorder GR-D70 onlyDV cable Optional Core filter To DV Video unit equipped with DV connectorTo Use This Camcorder As a Recorder GR-D70 only To DV @ Core filterPlayback Special Effects Using the Remote Control UnitSlow-Motion Playback Frame-By-Frame PlaybackTo hear the dubbed sound during playback Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing Insert EditingMake Connections Random Assemble Editing R.A.EditSET REMOTE/VCR Code Select Scenes Diagnosing VCR/CAMCORDER Timing Adjustment of VCR/CAMCORDER TimingAutomatic Editing to VCR For More Accurate EditingConnection To a Personal Computer Using USB cableUsing DV cable Using USB cableImage taken using Snapshot is too dark No power is suppliedFocus does not adjust automatically Snapshot mode cannot be usedDate/time does not appear Black & White Fader does not workImage looks like the shutter speed is too Slow White Balance cannot be activatedMemory card cannot be played back Charger indicator on the camcorder does Not lightAn error indication E01, E02 or E06 appears An error indication E03 or E04 appearsMemory Cards Battery PacksCassettes Main Unit How to handle a CD-ROMLCD Monitor About moisture condensation For Your MaintenanceCleaning The Camcorder After UseAC Adapter CamcorderLCD monitor Stereo Microphone Speaker Controls, Connectors And IndicatorsRemote Control IndexAudio/Video Input GR-D70 only Power Switch  pg pg @ Digital Video Input GR-D70 only1024 During Both Tape And Memory Card Recording LCD Monitor/Viewfinder Indications2b i t / SOUND1 During Memory Card Recording OnlyAppears when Digital Image Stabiliser DIS is Appears when in the Squeeze or Cinema modeAppears when the Insert Editing w or Insert Editing Displays the sound mode for approx seconds afterCassette Appears when no tape is loadedAppears when the tape ends during recording or playback HighAppears if a file in another format is selected E01, E02 or E06 Unit in Safeguard ModeE03 or E04 Unit in Safeguard Mode Eject RM-V717U optional Using The Optional RM-V717U Remote Control UnitTerms See previous page as well