JVC 1000MKV*UN*VP, LYT0672-001A specifications Some DO’S and DON’TS on the Safe USE of Equipment

Page 3

EN3

This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor/viewfinder playback are possible anywhere. Use the JVC BN-V11U**/V12U/V20U/V400U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.)

*GR-SXM55 only.

Caution on Replaceable lithium battery

The battery used in this device may present a fire or chemical burn hazard if mistreated.

Do not recharge, disassemble, heat above 100°C or incinerate.

Replace battery with Panasonic (Matsushita Electric), Sanyo, Sony or Maxell CR2025.

Danger of explosion or Risk of fire if the battery is incorrectly replaced.

Dispose of used battery promptly.

Keep away from children.

Do not disassemble and do not dispose of in fire.

When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).

Do not block the ventilation holes.

(If the ventilation holes are blocked by a newspaper, or cloth etc. heat may not be able to get out.)

No naked flame sources, such as lighted candles, should be placed on the apparatus.

When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

The apparatus shall not be exposed to dripping or splashing.

Do not use this equipment in a bathroom or places with water.

Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups etc.) on top of this unit.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way — switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of road safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume, as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

NEVER let anyone especially children push anything into holes, slots or any other opening in the case

— this could result in a fatal electrical shock;

NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

Image 3
Contents GR-SXM607 GR-SXM55 Connection to the mains supply in the United Kingdom It is recommended that youSome DO’S and DON’TS on the Safe USE of Equipment Audio/Video Cable Automatic DemonstrationHow To Attach The Core Filter Slide Battery Release and pull out the battery pack PowerCharging the Battery Pack To Detach The Battery PackApproximate recording time unit min Using the Battery PackUsing AC Power Perform of Charging the Battery Pack  pgTripod Mounting Grip AdjustmentViewfinder Adjustment Shoulder Strap AttachmentMenu Wheel Power Switch Display Power lamp10EN Recording Format SettingRegular VHS VCR EN1112EN Recording Mode SettingTape Length Setting Set the tape recording mode depending on your preferenceLoading/Unloading a Cassette EN13Open the LCD monitor fully Rotate Bright until the bright level 14ENShooting While Watching LCD Monitor To Stop RecordingEN15 Journalistic ShootingSELF-RECORDING 16EN ZoomZoom Out EN17 If you press during Record-Standby 18ENSnapshot Night-ScopeFade/Wipe Effects EN19Fades in/out to a black screen High shutter speed clearly captures fast-moving action Captures faster action than Sports mode20EN Program AE With Special EffectsEN21 Digital EffectsUsing Menus For Detailed Adjustment 22ENIf you select Jlip ID no System Menu EN23Menu Screen Explanations Camera Menu24EN Date/Time Insert Instant TitlesEN25 Set REC Time  and 2 of Animation above Time-LapseEN27 Exposure ControlManual Focus Focusing28EN Auto FocusPress Menu again to close the Menu Screen White Balance AdjustmentManual White Balance Operation EN2930EN Load a tape  pg Set the Power Switch toEN31 To cancel the effect, select OFF in stepCamcorder Use the provided Cable AdapterEN33 Power supply instead of the battery pack  pgBasic Connections Tape DubbingCassette Adapter optional 34ENFunctions Buttons Using the Remote Control Unit GR-SXM607 only EN3536EN Using the Remote Control Unit GR-SXM607 only Playback Zoom Animation and Time-LapseEN37 Insert Editing 38EN Using the Remote Control Unit GR-SXM607 onlyAudio Dubbing EN39For Insert Editing and Audio Dubbing SET REMOTE/VCR Code VCR Recording deckYou are now ready to try Random Assemble Editing Connect the editing cable to the Remote Pause terminal Connect the editing cable to the R.A.EDIT connectorEN41 Make ConnectionsSelect Scenes 42EN Using the Remote Control Unit GR-SXM607 onlyAutomatic Editing to VCR EN43As necessary before you start shooting When the Power Switch is set to or and the LCD monitor isViewfinder switches off automatically to save power 44ENTo avoid hazard To prevent damage and prolong service lifeEN45 Use only the following batteries46EN EN47 48EN EN49 # $ % 3 4 5 y u 8 9 50ENEN51 Indications During Recording 52ENEN53 Indications During Playback54EN Pg , 6Digital Zoom EN55