JVC 1000MKV*UN*VP, LYT0672-001A specifications Basic Connections, Tape Dubbing, EN33

Page 33
Press 4/6 on the camcorder and engage the VCR’s Record mode.
Engage the VCR’s Record-Pause mode and press 4/6 on the camcorder.
Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
Engage the VCR’s AUX and Record-Pause modes.

Basic Connections

1 Make sure all units are turned off.

2 Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 32).

If using a VCR . . . go to step 3.

If not . . . go to step 4.

3

4 Turn on the camcorder, the VCR and the TV.

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

NOTES:

It is recommended to use the AC Adapter as the

power supply instead of the battery pack (  pg. 7).

If your VCR has an S-Video input connector, connect the camcorder and the VCR using the provided S-Video cable. This can improve the dubbed picture quality.

To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power Switch to “” or “ ”, then set your TV to the appropriate input mode.

Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

EN33

Tape Dubbing

1 Following the illustration on pg. 32, connect the camcorder and the VCR.

2 Set the camcorder’s Power Switch to “ ”, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

3

4 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/6on the camcorder.

5

6

7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.

Image 33
Contents GR-SXM607 GR-SXM55 Connection to the mains supply in the United Kingdom It is recommended that youSome DO’S and DON’TS on the Safe USE of Equipment Audio/Video Cable Automatic DemonstrationHow To Attach The Core Filter Charging the Battery Pack PowerTo Detach The Battery Pack Slide Battery Release and pull out the battery packUsing AC Power Using the Battery PackPerform of Charging the Battery Pack  pg Approximate recording time unit minViewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Tripod MountingMenu Wheel Power Switch Display Power lamp10EN Recording Format SettingRegular VHS VCR EN11Tape Length Setting Recording Mode SettingSet the tape recording mode depending on your preference 12ENLoading/Unloading a Cassette EN13Open the LCD monitor fully Shooting While Watching LCD Monitor 14ENTo Stop Recording Rotate Bright until the bright levelEN15 Journalistic ShootingSELF-RECORDING 16EN ZoomZoom Out EN17 Snapshot 18ENNight-Scope If you press during Record-StandbyFade/Wipe Effects EN19Fades in/out to a black screen 20EN Captures faster action than Sports modeProgram AE With Special Effects High shutter speed clearly captures fast-moving actionEN21 Digital EffectsUsing Menus For Detailed Adjustment 22ENIf you select Jlip ID no Menu Screen Explanations EN23Camera Menu System Menu24EN Date/Time Insert Instant TitlesEN25 Set REC Time  and 2 of Animation above Time-LapseEN27 Exposure Control28EN FocusingAuto Focus Manual FocusManual White Balance Operation White Balance AdjustmentEN29 Press Menu again to close the Menu Screen30EN Load a tape  pg Set the Power Switch toEN31 To cancel the effect, select OFF in stepCamcorder Use the provided Cable AdapterBasic Connections Power supply instead of the battery pack  pgTape Dubbing EN33Cassette Adapter optional 34ENFunctions Buttons Using the Remote Control Unit GR-SXM607 only EN3536EN Using the Remote Control Unit GR-SXM607 only Playback Zoom Animation and Time-LapseEN37 Insert Editing 38EN Using the Remote Control Unit GR-SXM607 onlyAudio Dubbing EN39For Insert Editing and Audio Dubbing SET REMOTE/VCR Code VCR Recording deckYou are now ready to try Random Assemble Editing EN41 Connect the editing cable to the R.A.EDIT connectorMake Connections Connect the editing cable to the Remote Pause terminalSelect Scenes 42EN Using the Remote Control Unit GR-SXM607 onlyAutomatic Editing to VCR EN43Viewfinder switches off automatically to save power When the Power Switch is set to or and the LCD monitor is44EN As necessary before you start shootingEN45 To prevent damage and prolong service lifeUse only the following batteries To avoid hazard46EN EN47 48EN EN49 # $ % 3 4 5 y u 8 9 50ENEN51 Indications During Recording 52ENEN53 Indications During Playback54EN Pg , 6Digital Zoom EN55