: Pinch the release tab and pull out the battery holder.
2 Insert the battery in the holder, and be sure to have the “+” mark visible.
3 Slide the holder back in until you hear a click.
•Read the cautions in the instructions provided with the RM-V700U.
When using the remote control, be sure to point it at the remote sensor. The illustration shows the approximate transmitted beam effective area for indoor use.
The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.
: Pull out the battery holder while sliding the lock hole.
1
Installing The Battery (RM-V700U, optional)
The remote control uses one lithium battery (CR2025).
Open the battery compartment cover as illustrated.
Insert two ”AAA (R03)” size batteries in the correct direction.
Replace the battery compartment cover.
36EN USING THE REMOTE CONTROL UNIT (GR-SXM607 only) (cont.)
1
3
2
Installing The Batteries (RM-V715U, provided)
The remote control uses two ”AAA (R03)” size batteries. See “General Battery Precautions” ( pg. 45).
1
2
3
A
1
2
3
1
Lock hole
B
2
1 3
Knob
1
Remote sensor
Transmitted beam effective area