JVC LYT0672-001A, 1000MKV*UN*VP specifications 12EN, Recording Mode Setting, Tape Length Setting

12EN

MENU Wheel

Power Switch

Display

REC MODE REC MODE Menu

SP

LP

EX I T

SP Recording mode indicator

Display

	TAPE LENGTH		TAPE LENGTH
T 3 0			Menu
T 4 5
T 5 0
T 6 0
EX I T
		T3 0		Tape length
				indicator

GETTING STARTED (cont.)

Recording Mode Setting

Set the tape recording mode depending on your preference.

	Set the Power Switch to “	”. The power lamp
1 comes on.
2	Press MENU. The Menu Screen appears.
	Rotate MENU to select “	TO SYSTEM MENU” and

3 press it to display SYSTEM MENU.

4 Rotate MENU to select “REC MODE” and press it. The REC MODE Menu appears. Select “SP” or “LP” by rotating MENU and press it. The Menu Screen reappears with the highlight bar on “RETURN”. Press MENU to close the Menu Screen.

•“LP” (Long Play) is more economical, providing twice the recording time.

NOTE:

If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

Tape Length Setting

Set the tape length according to the length of the tape used.

1 Perform steps 1 through 3 above.

2 Rotate MENU to select “TAPE LENGTH”, then press it. The TAPE LENGTH Menu appears.

3 Rotate MENU to select the correct tape length setting.

•T30=30 minutes

•T45=45 minutes

•T50=50 minutes

•T60=60 minutes

4 Press MENU. The Menu Screen reappears with the highlight bar on “RETURN”. Press MENU to close the Menu Screen.

NOTE:

The tape remaining time (
pg. 14) is correct only if the correct tape length has been selected.