JVC LYT0002-0V4A Adjustment of VCR‘s against Camcorder Timing, Input Correction Data

64EN EDITING (Cont.)

Adjustment of VCR‘s against Camcorder Timing

VCR (Recording deck)

Power Dial

	M
A	5S
OFF
Y
A
L
P

Lock button

Select Dial

	48kHz MODE	FULL SOUND
	32kHz MODE	SOUND1
4	SYNCHRO	0 . 0
	DISPLAY	ON
	TIMECORDE	OFF

END

Playback Menu

48kHz MODE	FULL SOUND
32kHz MODE	SOUND1
4SYNCHRO	0 . 0
DISPLAY	ON
TIMECORDE	OFF
END

MENU

Play button MENU button Stop button

4 ACCESS PLAYBACK MENU

Point the remote control at the camcorder’s remote sensor and press R.A. EDIT ON/OFF to make the Random Assemble Editing menu disappear, then press MENU. The Playback Menu appears on the TV screen.

5 SELECT FUNCTION

Move the pointer and highlight bar to “SYNCHRO” by rotating the Select Dial, then press it. The value for “SYNCHRO” is high- lighted.

6 INPUT CORRECTION DATA

Based on the diagnostics performed (☞ pg. 63), you can now increase the VCR’s speed by rotating the Select Dial upward. You can also slow down the VCR’s speed by rotating the Select Dial downward. The adjustment range is from –1.3 to +1.3 seconds, in 0.1-second increments.

7 CLOSE MENU

Press the Select Dial twice.

•Now perform Random Assemble Editing beginning with step 2 on page 60.

NOTES:

●Before performing actual Random Assemble Editing, do a few Random Assemble Editing trial runs to check whether the value you have input is appropriate or not, and make adjustments accordingly.

●Depending on the recorder, there may be situations where the timing difference cannot be fully corrected.