Application (Record)
Taking pictures by setting the shutter speed
When recording, you can control the shutter speed to meet your recording purposes. Aperture is automatically adjusted to be appropriate for the set shutter speed.
Set mode dial to [ 
]
Rotate the rear dial to set the shutter speed
About the exposure meter |
| ||
| Set shutter speed | ••Proper exposure is | |
|
|
| not possible in the |
|
|
| |
|
|
| range indicated in |
|
|
| red. |
| Aperture | value |
|
| (Automatic adjustment) |
| |
••When you increase the shutter speed, you can reduce jitter when recording a subject.
••When you decrease the shutter speed, the subject’s movement is shown.
Shutter speeds that can be set (seconds) | Aperture value set | |
(Per 1/3 EV) | ||
| ||
8∗ - 1/2000 | F2.8 - F8.0 |
∗ISO Sensitivity may be changed depending on the shutter speed that you set. (→89)
●●When the picture is too bright or too dark or there is incorrect exposure, the numbers for the aperture value and shutter speed are shown in red.
●●The brightness of the LCD monitor/Viewfinder and the recorded pictures may differ. Check the pictures on the playback screen.
●●Display of the shutter speed will count down when the shutter speed is set to slow and the shutter button is pressed all the way. (Depending on shutter speed settings, count down for processing may be displayed again after this.)
●●We recommend using a tripod when the shutter speed is slow.
●●The [Sensitivity] is automatically set to [AUTO] when you switch the Recording Mode to
- 109 - | VQT5B76 |