Application (Record)
Recording panorama pictures [Panorama Shot] Mode
You can easily record a panorama picture by panning the camera towards the direction you want to record, and automatically combining the burst of pictures taken during that time.
Set mode dial to [ 
]
••The recording direction is set as “left → right” and the picture effect is set to [No Effect] at the time of purchase.
Press the shutter button halfway to focus
Press the shutter button fully and pan the camera in a small circular motion to the recording direction to start recording
••Taking pictures from left to right
2 sec.
1 sec. | 3 sec. |
Recording direction and progress status |
|
(approximate) | 4 sec. |
|
••Pan the camera so that you make a complete circuit in approx. 8 seconds
-Pan the camera at a constant speed.
-You may not be able to take pictures successfully if you move the camera too quickly or too slowly.
-Pan the camera in a small circular motion.
Press the shutter button fully again to end recording
••You can also end recording if you stop panning the camera while taking pictures.
■■Tips
••Pan the camera in the recording direction as steadily as possible. If the camera shakes too much, it may not be able to take pictures or may end up creating a narrow (small) panorama picture.
Pan the camera to a point slightly ahead of the point that you want to take. (However, the last frame is not recorded to the end.)
- 121 - | VQT5B76 |