Application (Record)
Using the [Rec] menu
••For the setting procedures of the menu. (→57)
[Quality]
Set quality of picture. ■■Settings
[Fine] | Gives priority to picture quality and saves pictures in | |
JPEG file format. | ||
| ||
[Standard] | Saves pictures in JPEG file format using standard | |
picture quality. | ||
| ||
[RAW+Fine] | Saves pictures in JPEG file format in addition to the | |
| RAW file format.∗1 | |
[RAW+Standard] | ||
[RAW] | Saves pictures in the RAW file format.∗2 | |
[3D+Fine] | Simultaneously saves 3D still picture data (MPO) and | |
| pictures in JPEG file format. (Only when [3D Photo | |
[3D+Standard] | ||
Mode] Scene Mode is set.) |
∗1 If you delete a RAW file from the camera, the corresponding JPEG file is also deleted. ∗2 You cannot set the picture size. (The pictures are saved using the maximum
recordable pixels for each image aspect ratio.)
■■About RAW file
You can use Ichikawa Soft Laboratory’s “SILKYPIX Developer Studio” to save RAW pictures in JPEG or other file formats that can be displayed on a PC, etc., in order to perform advanced editing.
Download “SILKYPIX Developer Studio” from website and install it on your computer to use. For details on how to download the software, etc., refer to (→192).
●●[Quality] is fixed to [ 
] in [High Sens.] Scene Mode.
●●You cannot set to [ 
], [ 
], or [ 
] in the following cases. ••[Panorama Shot] Mode
••[Panning] [Handheld Night Shot] [HDR] ([Scene Mode]) ••When [Burst] is set to [ 
]
- 144 - | VQT5B76 |