Connecting with other devices
Printing
You can connect directly to a
For details, see the manual for your printer.
Preparation:
••When printing pictures from the
••Adjust the print quality or other settings on your printer, as needed.
••Turn on the camera and printer.
Check the plug direction and insert it straight in.
(If the cable is inserted in the wrong direction, the plug could become deformed and cause faulty operation)
••Do not disconnect the USB connection cable (supplied) when the cable disconnection icon [ ] is displayed (may not be displayed with some printers).
USB connection cable (supplied)
Connect camera to printer
••Do not use any other USB connection cables except the supplied one or a genuine Panasonic USB connection cable
Press on the camera to select [PictBridge(PTP)], and press [MENU/SET]
●●Disconnect USB connection cable (supplied) after printing.
●●Use a battery with sufficient battery power or the AC adaptor (optional). When the battery begins to run out during communication, a warning beep sounds. Cancel printing and disconnect USB connection cable (supplied).
●●Before connecting or disconnecting the AC adaptor (optional), turn the camera off. ●●Before inserting or removing a card, turn the camera off and disconnect the USB
connection cable.
●●Still pictures recorded in a RAW file cannot be printed. (The still pictures recorded in JPEG file format at the same time as the RAW file can be printed.)
●●Motion pictures cannot be printed.
- 197 - | VQT5B76 |