Basics
Using the [Setup] menu
••For the setting procedures of the menu. (→57)
[MF Assist]
Set whether to enlarge the focus point when Manual Focus is used to adjust focus. (→104)
[Economy]
Turn off the camera or make the LCD monitor go dark while not using the camera to minimize battery consumption.
●●[Sleep Mode]
The camera is automatically turned off if the camera has not been used for the time selected on the setting.
••To restore → Press the shutter button halfway, or turn on the power again.
■■Settings: [10MIN.] / [5MIN.] / [2MIN.] / [1 MIN.] / [OFF]
●●Cannot be used in the following cases:
••When the camera is using AC adaptor (optional) and DC coupler (optional) ••When connected to computer/printer
••During motion picture recording/playback ••During Slide Shows
●●Settings fixed to [5MIN.] in [Intelligent Auto] Mode.
●●[Auto Monitor Off]
The LCD monitor is automatically turned off if the camera has not been used for the time selected on the setting.
••Press any button to turn on the LCD monitor again.
■■Settings: [30 SEC.] / [15 SEC.] / [OFF]
●●Cannot be used in the following cases:
••When the camera is using AC adaptor (optional) and DC coupler (optional) ••When connected to computer/printer
••During motion picture recording/playback ••During Slide Shows
••[Intelligent Auto] Mode ••While the
●●[Sleep Mode] is fixed to [2MIN.] when [Auto Monitor Off] is set to [15 SEC.] or [30 SEC.].
- 68 - | VQT5B76 |