Basics
Using the [Setup] menu
••For the setting procedures of the menu. (→57)
[Expo.Meter]
You can set whether to display the exposure meter when operations such as shutter speed and aperture value adjustments or Exposure Compensation are performed.
■■Settings: [ON] / [OFF]
Exposure meter
●●If the exposure meter is not displayed, press the [DISP.] button to switch the display of the LCD monitor/viewfinder.
●●The exposure meter will turn off if no operation is performed for approximately 4 seconds.
[Lens Resume]
●●[Zoom Resume]
When you turn this unit on, the zoom positions when you last turned this unit off are automatically restored.
■■Settings: [ON] / [OFF] ●●[MF Resume]
It will memorize the MF position set with the Manual Focus. It will resume the memorized Manual Focus position when you return to Manual Focus Recording.
■■Settings: [ON] / [OFF]
●●MF position will be memorized in the following cases: ••Turning the camera off
••When switching to a type of focus other than Manual Focus ••When switched to playback mode
●●Zoom position will be set all the way to wide when the [Zoom Resume] is set to [OFF]. ●●When [MF Resume] is set to [OFF], MF position will be the distance focused at the
time of recording in Manual Focus.
●●Depending on the recording conditions, the memorized MF positions and resumed MF positions might be different. Before you start recording, make sure the subject is in focus.
- 67 - | VQT5B76 |