Basics
Using the [Setup] menu
••For the setting procedures of the menu. (→57)
[Monitor Display] / [Viewfinder]
Brightness, color, or red or blue tint of the LCD monitor/viewfinder is adjusted.
■■Settings
[Brightness] | Adjust the brightness. |
|
|
[Contrast · Saturation] | Adjust the contrast or clarity of colors. |
|
|
[Red Tint] | Adjust the red tint. |
|
|
[Blue Tint] | Adjust the blue tint. |
|
|
Press 
to select the setting item and press 
to make adjustments
Press [MENU/SET]
●●It will adjust the LCD monitor when the LCD monitor is in use, and the viewfinder when the viewfinder is in use.
●●Some subjects may look different from their actual appearance, but the recorded picture will not be affected.
[Monitor Luminance]
These menu settings make it easier to see the LCD monitor when you are in bright places.
■■Settings
| The brightness is adjusted automatically depending on how bright it |
([Auto Power Monitor]) | is around the camera. |
| |
([Power Monitor]) | The brightness becomes higher than usual for easy viewing outdoors. |
| |
[OFF] | — |
|
|
●●Cannot select [ 
] ([Auto Power Monitor]) in playback mode.
●●[ ] ([Power Monitor]) returns to ordinary brightness if there is no operation for 30 seconds when recording. (Press any button to make the screen brighter again.)
●●Because the picture shown on the LCD monitor screen emphasizes brightness, some subjects may look different than their actual appearance, but this will not affect the recorded picture.
●●Setting [Monitor Luminance] reduces the operating time.
- 63 - | VQT5B76 |