Panasonic DMC-LC5PP operating instructions Compensating the Exposure, 500 750 1000

Compensating the Exposure

EXPOSURE

EXIT:

If there is a difference between the subject and background brightness, since you cannot set the correct exposure, you can compensate it.

[Preparation]

•Set the operational mode dial and REC mode dial. (P25)

1 Press the [		] button to
select [	EXPOSURE].

2 Press 2/1 to compensate the exposure.

•You can compensate from -2 EV to +2 EV with 0.25 EV step.

(EV is an abbreviation of Exposure Value, and it is the amount of light given to the CCD by the aperture value and the shutter speed.

EV0: the exposure capacity with the aperture value F1.0 and the shutter speed 1 second

When the aperture value or shutter speed rises, EV1, EV2, EV3... rise too.)

•The compensation state is not reflected on the LCD monitor.

Shutter speed Aperture value

8 - 1/500	2.0 - 8.0
1/750	5.6 - 8.0
1/1000	8.0

3

4

Press the [REVIEW/SET] button.

•The compensation window will close. Take a picture.

• The recording method is the same as in “Taking Pictures (AUTO Mode)”. (P28)

•When the shutter speed is faster than 1/500, the range of aperture value which is possible to compensate exposure will be limited. (A)

•In AUTO [ ], manual exposure [ ] or motion image [ ] mode, it is not possible to compensate exposure.

43