
Connecting to PC
[Preparation]
Only if using Windows® 98 or Windows® 98 Second Edition, start the supplied CD from PC and install the USB driver.
1
2
Connect the camera to PC via the supplied USB cable.
After inserting the memory card into the camera, set the operational
mode dial to playback [] and turn the power switch to [ON].
[Windows]
The drive is shown on the [My computer] folder.
•If it is the first time you are connecting the camera to PC, the required driver is installed automatically in order to let the camera be recognized by the Windows plug and play, then it is shown on the [My computer] folder.
[Macintosh]
The drive is shown on the screen.
•When connecting to PC it is recommended to use the AC adaptor for the power source.
•For further information, read the supplied operating instructions for USB connection kit.
85