Selecting the Metering Modes
The camera is usually set to multiple [ 
], but it is possible to switch to center weighted [ 
] or spot [ 
] mode.
[Preparation]
•Set the operational mode dial and REC
mode dial. (P25)
1 Press the metering mode selection button.
• Every time you press this button, what is displayed changes as shown below.
Multiple | Center weighted | Spot |
: Multiple
Considering the brightness variation on the whole screen, adjust the exposure correctly.
: Center weighted
Let the subject be centered on the LCD monitor and set the metering mode.
: Spot
Set the metering mode using the spot metering indication that is displayed on the LCD monitor.
2 Take a picture.
• The recording method is the same as in “Taking Pictures (AUTO Mode)”. (P28)
•When taking pictures with spot mode [
], it is recommended to use the LCD monitor.
•When recording in AUTO [ 
] or motion image [ 
] mode, the camera is set to multiple.
48