Panasonic NV-GS180EB Setting date and time, Adjusting LCD monitor/viewfinder, About date/time

Page 16

Before using

Setting date and time

If the screen shows the incorrect date/time, then adjust it.

≥Set to Tape Recording Mode or Card

Recording Mode.

1Set [BASIC] >> [CLOCK SET] >> [YES].

2006

2Move the joystick left or right in order to select the item to be set. Then move the joystick up or down to set the desired value.

≥The year will change as follows: 2000, 2001, ..., 2089, 2000, ...

≥The 24-hour clock is used.

3Press the joystick to determine the setting.

≥The clock function starts at [00] seconds.

ªAbout date/time

≥The date and time function are driven by a built-in lithium battery.

≥Make sure to check the time before recording because the built-in clock is not very accurate.

ªRecharging the built-in lithium battery

≥If [0] or [--] is indicated when the camera is turned on, then the built-in lithium battery runs down. Connect the AC adaptor to the camera or place the battery on the camera, and the built-in lithium battery will be recharged. Leave the camera as is for approx. 24 hours, and the battery will drive the date and time for approx.

6 months. (Even if the [OFF/ON] switch is set to [OFF], the battery is still being recharged.)

WARNING

THE LITHIUM BATTERY IN THIS EQUIPMENT MUST ONLY BE REPLACED BY QUALIFIED PERSONNEL. WHEN NECESSARY, CONTACT YOUR LOCAL PANASONIC SUPPLIER.

Adjusting LCD monitor/viewfinder

ªAdjusting the brightness and colour

level

1Set [SETUP] >> [LCD SET] or [EVF SET] >> [YES].

2Move the joystick up or down in order to select the item to be adjusted.

[LCD SET]

: Brightness of the LCD monitor

: Colour level of the LCD monitor [EVF SET]

EVF : Brightness of the viewfinder

3Move the joystick left or right to move the bar indication representing the brightness.

4Press the [MENU] button or the joystick to complete the settings.

≥In order to adjust the brightness of the viewfinder, close the LCD monitor, and the viewfinder will be activated.

≥When the LCD monitor is rotated by 180° towards the lens, the brightness of the LCD monitor cannot be adjusted.

≥These settings will not affect the images actually recorded.

16

VQT0T87

Image 16

Contents Operating Instructions Information for Your Safety How to replace the FuseBefore Use AC AdaptorCarefully observe copyright laws Files recorded on a SD Memory CardPages for reference Menu operation flow is indicated by in the descriptionContents Accessories AC adaptor, DC input lead, AC mains lead Battery packOptional Sales and Support InformationParts identification and handling CameraVolume lever s /VOLr Cassette holderCassette cover Zoom lever W/TUsing the LCD monitor Adjust the belt length and the pad positionFitting the lens cap Grip beltUsing the viewfinder Power supplyConnecting to the AC outlet Fitting the batteryRemoving the battery Charging time and recordable timeWhen the cassette holder does not Come out When the cassette holder cannot be HousedInserting/removing a cassette Inserting/removing the cassetteCard access lamp Inserting/removing a cardConcerning the card SD Memory CardHow to use the joystick Selecting a modeTurning the camera on Card recording mode AUTO/MANUAL/FOCUS switch is set to Auto Switching the languageSet Language select the desired language Using the menu screen About the menu settingOperating with remote control To exit the menu screenSetting date and time Adjusting LCD monitor/viewfinderRecharging the built-in lithium battery Adjusting the brightness and colour LevelUsing the remote control Remote controlOrder to increase the brightness Entire LCD monitor Changing the picture quality on LCD monitorInstall a button-type battery Selecting the remote control mode Remote control usable rangeConcerning the button-type battery About auto mode Recording modeCheck before recording Basic camera holdingOn-screen display in the tape recording mode Recording on a tapeConcerning the remaining tape time Indication on the screen Remove the lens capCheck the recording Blank search functionRecording still pictures onto a card Photoshot Stopping blank search midway ThroughOn-screen display in the card recording mode Concerning the focusing areaProgressive Photoshot Select the size of still pictures to be Recorded on a cardZoom in/out function Recording yourselfDigital zoom function To use the zoom microphone functionTo cancel the quick start when Power is set to OFF Quick startBacklight compensation function To return to normal recordingSoft skin mode To cancel the colour night view FunctionTo cancel the soft skin mode Night view functionsTo cancel the tele-macro function To cancel fadingTele-macro function Fade in/fade out functionWind noise reduction function Self-timer recordingRecording images for wide-screen TVs To cancel the image stabilizer function ≥Set to Tape Recording Mode Set Advance SIS onImage stabilizer function Continuous PhotoshotRecording in various situations Scene mode To cancel the scene mode functionRecording in natural colours White balance Manual shutter speed/aperture adjustment Manual focus adjustmentTo restore to automatic adjustment Shutter speed range Manual iris/gain adjustmentIris/gain value range To adjust volume Settings on the audioPlaying back tape Slow-motion playback/ frame-by-frame playbackPress the Play 1 button on the remote control Variable-speed search functionTo return to normal playback Frame-by-frame playbackPlaying back card Playback on TVTo display the on-screen information On the TV Deleting files recorded on a card To display multiple playback filesAbout the compatibility of still pictures To delete all filesFormatting a card Writing the printing data on a card Dpof settingProtecting files on a card Edit mode Recording from a tape onto a cardCopying onto a DVD recorder or a VCR Dubbing ≥The image and sound are reproducedUsing the DV Cable for Recording Digital Dubbing ≥Set to Tape Playback Mode Audio dubbingBefore recording with audio dubbing To play back the sound recorded with Audio dubbingWhen you stop printing halfway Menu list Tape Recording MenuTape Playback Menu MenuSetup Setup Display -45-REMOTECard Recording Menu Picture Playback MenuMenus related to taking pictures Menus related to playback Other menusIndications Basic indicationsRecording indications Playback indicationsConfirmatory indications Textual indicationsFunctions cannot be used simultaneously There is no ink. Check the connected printerThere is no paper. Check the connected printer Check the connected printerBefore requesting repair Problems and solutions Power/Body Movie camera power cannot be turned onMovie camera power is turned off automatically Movie camera power does not stay on long enoughRemote control does not function Cassette cannot be removedNo operation other than cassette removal can be performed Screen has changed suddenlyHeadphones Original sound was erased when audio dubbing was performedPlayback Sound Different sounds are reproduced at the same timePush the Reset Switch is displayed Using MotionDV Studio 5.3E LE for DVDuring playback, Unplayable Card is displayed OthersAbout dirty heads About condensationAbout the movie camera About the battery Be sure to detach the battery after usePrepare spare batteries when going out for recording While carrying the movie camera, do not drop or bump itAbout the AC adaptor About the cassetteAbout the card Folder structure of the cardExplanation of terms LCD monitor/viewfinderPeriodical check-ups Automatic white balanceWhite balance Auto focusSpecifications SpecificationsHttp//panasonic.co.jp/pavc/global/cs This Site is English onlyPicture Index NumericsVQT0T87 VQT0T87 F1105Nm0 3000 a