Record mode
Image stabilizer function
Reduces the image shaking due to hand movement when recording.
≥Set to Tape Recording Mode.
1Set [ADVANCE] >> [SIS] >> [ON].
ªTo cancel the image stabilizer function
Set [ADVANCE] >> [SIS] >> [OFF].
≥When a tripod is used, we recommend that you turn the image stabilizer off.
≥Under fluorescent lighting, image brightness may change or colours may not look natural.
≥If the image stabilizer is set when the wide function is used, the wide function will be cancelled.
≥When the night view function is used, the image stabilizer function does not work. If so, the [[] indication flashes.
≥In the following cases, the image stabilizer function may not work effectively.
≥When the digital zoom is used ≥When a conversion lens is used
≥When recording is done in an extremely dark place
≥When the camera is shaken greatly
≥When you record a moving subject while tracking it
Continuous Photoshot
Records still pictures continuously at a certain interval.
≥Set to Card Recording Mode.
1Set [BASIC] >> [PICTURE SIZE] >> [640].
2Set [ADVANCE] >> [BURST MODE] >> [ON].
3Press and hold the [PHOTO SHOT] button.
PHOTO
SHOT
ªTo stop continuous photoshot
midway through
Release the [PHOTO SHOT] button.
≥The camera records up to 10 still pictures at intervals of 0.5 seconds. If the shutter speed is manually set to 1/25, then the still pictures can be recorded at intervals of 0.7 seconds.
≥One more still picture may be recorded after you release the [PHOTO SHOT] button.
≥If set [SELF TIMER] >> [YES], the movie camera records the maximum number of pictures recordable.
≥Intervals between recording pictures may become longer depending on the card. We recommend using a Panasonic SD Memory Card.
≥When using the card formatted by other equipment or a card that was recorded and erased repeatedly, the intervals between recording pictures may become longer. If so, back up your important data on a PC, and format your card with this movie camera.
29
VQT0T87