Panasonic NV-GS180EB Playback Sound, Headphones, Different sounds are reproduced at the same time

Others

Playback (Sound)

1:Sound is not played back from the built-in speaker of the movie camera or the

headphones.

0Is the volume too low? During playback, push the [s /VOLr] lever to display the volume

indication and adjust it. (-34-)

2: Different sounds are reproduced at the same time.

•Have you set [SETUP] >> [12bit AUDIO] >> [MIX]? If you set [AUDIO REC] >> [12bit] and dub audio to a recorded tape, you can hear the sound on recording and the sound dubbed at a later time. To hear the sounds separately, set to [ST1] or [ST2]. (-41-)

•Have you set [SETUP] >> [AUDIO OUT] >> [STEREO] and reproduced a picture containing the main sound and sub sound? Set to [L] to hear main sound, and set to [R] to hear the sub

sound. (-46-)

3: Audio dubbing cannot be performed.

•Is the accidental erasure prevention slider on the cassette open? If it is open (set to [SAVE]), audio dubbing cannot be performed. (-11-)

•Are you attempting to edit a tape portion that was recorded in LP mode? LP mode does not

allow audio dubbing. (-20-)

4:The original sound was erased when audio dubbing was performed.

•If you perform audio dubbing on a recording made in [16bit] mode, the original sound will be

erased. If you wish to preserve the original sound, be sure to select [12bit] mode when recording.

5: Sounds cannot be played back.

•Although a cassette with no audio dubbing is being played, have you set [SETUP] >> [12bit AUDIO] >> [ST2]? To play back a cassette with no audio dubbing, set

[12bit AUDIO] >> [ST1]. (-41-)

•Is the variable speed search function working? Press the [VAR SEARCH] button on the remote control to cancel the variable speed search

function. (-35-)

6: Noise is heard from the right headphone.

•Have you set [BASIC] >> [AV JACK] >> [OUT]? When you use the headphones, set to [OUT/ Ë].

Playback (Pictures)

1: Mosaic-pattern noise appears on images during cue or review playback.

• This phenomenon is characteristic of digital video systems. It is not a malfunction.

2:Horizontal stripes appear on images during cue and review playback.

• Horizontal stripes may appear depending on the scene, but this is not a malfunction.

3: Although the movie camera is correctly connected to a TV, playback images cannot be seen.

•Have you selected video input on the TV? Please read the operating instructions of your

TV and select the channel that matches the input terminals used for the connection.

4: Playback picture is not clear.

•Are the heads of the movie camera dirty? If the heads are dirty, playback image cannot be clear. Clean the heads by using the head cleaner for digital video (optional). (-54-)

•If the terminal for the AV cable is soiled, noises may appear on the screen. Wipe the soil off the terminal with a soft cloth, and then connect the cable to the AV terminal.

•Is a picture containing a copyright protection signal (copy guard) being recorded? When a protected picture is played back by the movie camera, mosaic-like patterns appear on the picture.

Card

1: Recorded pictures are not clear.

•Have you set [BASIC] >> [PICT. QUALITY] >> [ ]? If recording is done with it set to [ ], pictures with fine details may include a mosaic-like pattern. Set [PICT. QUALITY] >> [ ]. (-23-)

2:A file recorded on a card cannot be deleted.

• Is the file locked? Locked files cannot be deleted. (-38-)

• For the SD Memory Card, if its write protect switch is set to [LOCK], then deletion is disabled. (-12-)

3:Photoshot playback images do not look normal.

•The picture may be damaged. In order to prevent the loss of image data, backing up on a cassette or a personal computer is

recommended.

4: Even if a card is formatted, it cannot be used.

•Either the movie camera or the card may be damaged. Please consult a dealer.

52

VQT0T87