Before using
(22)LCD monitor open part [OPEN]
(23)Reset button [RESET]
(24)Power LCD button [POWER LCD]
(25)Mode select switch [AUTO/MANUAL/FOCUS]
(26)Card access lamp
(27)DV terminal [DV]
(28)Card slot cover
(29)Card slot
| (31) | |
| (32) | |
(30) | (33) | |
(34) | ||
| ||
| (35) |
(37)
(37)Shoulder strap fixture
1
3
2
≥Put the strap through the fixture 1 and through the stopper 2 so it will not come off. Extend part 3 by at least 2 cm.
≥Fit the other end of the belt similarly.
(30) | Cassette holder |
(31) | Cassette eject lever [OPEN/EJECT] |
(32) | Cassette cover |
(33) | Zoom lever [W/T] |
| Volume lever [s /VOLr] |
(34) | Photoshot button [PHOTO SHOT] |
1
(38)
(38)Lens hood
2
(35) Accessory shoe |
≥Accessories, such as a stereo microphone
(36)
(36)Tripod receptacle
This is a hole for attaching the camera to optional
≥You cannot open the card slot cover when the tripod is used. Insert the card first and then attach the tripod.
In order to remove the lens hood, rotate it counterclockwise 1. In order to fit it, put into slot 2, and then rotate it clockwise.
≥Fit the MC protector or the ND filter of the Filter Kit
hood. Do not fit the other accessories on the hood. (Except for the lens cap)
≥When fitting the tele conversion lens
≥When 2 lens accessories, such as the ND filter and tele conversion lens, are fitted and the [W/T] lever is pressed toward the [W] side, the 4 corners of an image will be darkened. (Vignetting)
7
VQT0T87