Panasonic NV-GS180EB Check the recording, Blank search function, To record still pictures clearly

Page 22

Record mode

Check the recording

The last image recorded is played back for 2 to

3 seconds. After checking, the camera will be set to a recording pause.

Set to Tape Recording Mode.

1Press the joystick during the recording pause until the icon 1 appears.

2Move the joystick down to select the recording check icon [ ].

1

Blank search function

Searches for the last part of the image recorded (unused part of the tape).

Set to Tape Recording Mode.

1Set [BASIC] >> [BLANK SEARCH] >> [YES].

ªStopping blank search midway

through

Move the joystick down to select the [] icon.

If the cassette tape has no blank part, then the camera will stop at the end of the tape.

The camera stops at a point approx. 1 second before the end of the last image recorded. When you start recording at that point, the image can be recorded seamlessly from the last image.

Recording still pictures onto a card (Photoshot)

Set to Card Recording Mode.

1Press the [PHOTO SHOT] button halfway in order to adjust focusing. (For auto focusing only)

The iris/gain value is fixed and this camera focuses on the subject automatically.

PHOTO

SHOT

1

2

1Shutter chance mark

± (The white lamp flashes.): Focusing

¥ (The green lamp lights up.):

When in focus

No mark: When focusing is unsuccessful The shutter chance mark is indicated as follows when the [PHOTO SHOT] button is not pressed halfway. Please use it as a guide for recording.

¥(The green lamp lights up.):

When in focus and a good picture can be recorded

±(White lamp lights up.):

Almost in focus

2Focus area

2Press the [PHOTO SHOT] button fully.

ªTo record still pictures clearly

When zooming in on the subject with a magnification of 4k to 10k or higher, it is difficult to reduce the slight shaking from holding the movie camera by hand. We recommend decreasing the zoom magnification and approaching the subject when recording.

When recording still pictures, hold the movie camera firmly with your hands and keep your arms stationary at your side so as not to shake the movie camera.

You can record stable pictures without shaking by using a tripod and the remote control.

22

VQT0T87

Image 22
Contents Operating Instructions Before Use Information for Your SafetyHow to replace the Fuse AC AdaptorPages for reference Carefully observe copyright lawsFiles recorded on a SD Memory Card Menu operation flow is indicated by in the descriptionContents Optional AccessoriesAC adaptor, DC input lead, AC mains lead Battery pack Sales and Support InformationParts identification and handling CameraCassette cover Volume lever s /VOLrCassette holder Zoom lever W/TFitting the lens cap Using the LCD monitorAdjust the belt length and the pad position Grip beltUsing the viewfinder Power supplyRemoving the battery Connecting to the AC outletFitting the battery Charging time and recordable timeInserting/removing a cassette When the cassette holder does not Come outWhen the cassette holder cannot be Housed Inserting/removing the cassetteConcerning the card Card access lampInserting/removing a card SD Memory CardHow to use the joystick Selecting a modeTurning the camera on Card recording mode AUTO/MANUAL/FOCUS switch is set to Auto Switching the languageSet Language select the desired language Operating with remote control Using the menu screenAbout the menu setting To exit the menu screenRecharging the built-in lithium battery Setting date and timeAdjusting LCD monitor/viewfinder Adjusting the brightness and colour LevelOrder to increase the brightness Entire LCD monitor Using the remote controlRemote control Changing the picture quality on LCD monitorInstall a button-type battery Selecting the remote control mode Remote control usable rangeConcerning the button-type battery Check before recording About auto modeRecording mode Basic camera holdingConcerning the remaining tape time Indication on the screen On-screen display in the tape recording modeRecording on a tape Remove the lens capRecording still pictures onto a card Photoshot Check the recordingBlank search function Stopping blank search midway ThroughProgressive Photoshot On-screen display in the card recording modeConcerning the focusing area Select the size of still pictures to be Recorded on a cardDigital zoom function Zoom in/out functionRecording yourself To use the zoom microphone functionBacklight compensation function To cancel the quick start when Power is set to OFFQuick start To return to normal recordingTo cancel the soft skin mode Soft skin modeTo cancel the colour night view Function Night view functionsTele-macro function To cancel the tele-macro functionTo cancel fading Fade in/fade out functionWind noise reduction function Self-timer recordingRecording images for wide-screen TVs Image stabilizer function To cancel the image stabilizer function≥Set to Tape Recording Mode Set Advance SIS on Continuous PhotoshotRecording in various situations Scene mode To cancel the scene mode functionRecording in natural colours White balance Manual shutter speed/aperture adjustment Manual focus adjustmentTo restore to automatic adjustment Shutter speed range Manual iris/gain adjustmentIris/gain value range Playing back tape To adjust volumeSettings on the audio Slow-motion playback/ frame-by-frame playbackTo return to normal playback Press the Play 1 button on the remote controlVariable-speed search function Frame-by-frame playbackPlaying back card Playback on TVTo display the on-screen information On the TV About the compatibility of still pictures Deleting files recorded on a cardTo display multiple playback files To delete all filesFormatting a card Writing the printing data on a card Dpof settingProtecting files on a card Copying onto a DVD recorder or a VCR Dubbing Edit modeRecording from a tape onto a card ≥The image and sound are reproducedUsing the DV Cable for Recording Digital Dubbing Before recording with audio dubbing ≥Set to Tape Playback ModeAudio dubbing To play back the sound recorded with Audio dubbingWhen you stop printing halfway Tape Playback Menu Menu listTape Recording Menu MenuCard Recording Menu SetupSetup Display -45-REMOTE Picture Playback MenuMenus related to taking pictures Menus related to playback Other menusRecording indications IndicationsBasic indications Playback indicationsConfirmatory indications Textual indicationsThere is no paper. Check the connected printer Functions cannot be used simultaneouslyThere is no ink. Check the connected printer Check the connected printerMovie camera power is turned off automatically Before requesting repair Problems and solutionsPower/Body Movie camera power cannot be turned on Movie camera power does not stay on long enoughNo operation other than cassette removal can be performed Remote control does not functionCassette cannot be removed Screen has changed suddenlyPlayback Sound HeadphonesOriginal sound was erased when audio dubbing was performed Different sounds are reproduced at the same timeDuring playback, Unplayable Card is displayed Push the Reset Switch is displayedUsing MotionDV Studio 5.3E LE for DV OthersAbout dirty heads About condensationAbout the movie camera Prepare spare batteries when going out for recording About the batteryBe sure to detach the battery after use While carrying the movie camera, do not drop or bump itAbout the card About the AC adaptorAbout the cassette Folder structure of the cardPeriodical check-ups Explanation of termsLCD monitor/viewfinder Automatic white balanceWhite balance Auto focusHttp//panasonic.co.jp/pavc/global/cs SpecificationsSpecifications This Site is English onlyPicture Index NumericsVQT0T87 VQT0T87 F1105Nm0 3000 a