Panasonic NV-GS180EB Zoom in/out function, Recording yourself, Digital zoom function

Page 24

Record mode

Zoom in/out function

You can zoom in up to 10k optically.

Set to Tape/Card Recording Mode.

1Wide-angle recording (zoom out): Push the [W/T] lever towards [W]. Close-up recording (zoom in):

Push the [W/T] lever towards [T].

/VOL

W T

1tW T

5tW

T

10tW T

When zooming in and taking a picture while holding the movie camera by hand, we recommend using the image stabilizer function.

When you are zooming on a faraway subject, a sharper focus is achieved if the recording subject is 1.2 metres or further from the movie camera.

When the zoom speed is high, the subject may not be focused easily.

When the zoom magnification is 1k, the movie camera can focus on a subject approx. 4 cm distant from the lens.

ªDigital zoom function

If the zoom magnification exceeds 10 times, then the digital zoom function will be activated. The digital zoom function allows you to select a magnification from 20k to 500k.

1Set [ADVANCE] >> [D.ZOOM] >> [20k] or [500k].

20tW

 

 

T

[OFF]: Optical zoom only (Up to 10k)

[20k]: Up to 20k

[500k]: Up to 500k

The larger the digital zoom magnification, the more the image quality is degraded.

When the Card Recording mode is used, the digital zoom function cannot be used.

ªTo use the zoom microphone function

Interlocked with the zooming operation, the microphone will collect sounds clearly far away with the tele-shot or those in the vicinity with the wide-angle shot.

Set to Tape Recording Mode.

1 Set [ADVANCE] >> [ZOOM MIC] >> [ON].

ZOOM

ªAbout the variable speed zoom

function

When pushing the [W/T] lever as far as it will go, you can zoom from 1k to 10k in 2.1 seconds at the maximum.

The zoom speed varies according to the amount of movement of the [W/T] lever.

The variable speed zoom function cannot be used with the remote control.

Recording yourself

You can record yourself while viewing the LCD monitor. You can record persons in front of the camera while presenting them the image. The image is horizontally flipped as if you see a mirror image. (The image to be recorded is the same as that recording.)

1Rotate the LCD monitor towards the lens side.

When the LCD monitor is opened, the viewfinder will be automatically turned off. If the LCD monitor is rotated towards the lens side though, then the viewfinder will be activated.

When the LCD monitor is rotated towards the lens side, the icon will not be displayed even if you push the centre of the joystick.

24

VQT0T87

Image 24
Contents Operating Instructions Information for Your Safety How to replace the FuseBefore Use AC AdaptorCarefully observe copyright laws Files recorded on a SD Memory CardPages for reference Menu operation flow is indicated by in the descriptionContents Accessories AC adaptor, DC input lead, AC mains lead Battery packOptional Sales and Support InformationParts identification and handling CameraVolume lever s /VOLr Cassette holderCassette cover Zoom lever W/TUsing the LCD monitor Adjust the belt length and the pad positionFitting the lens cap Grip beltUsing the viewfinder Power supplyConnecting to the AC outlet Fitting the batteryRemoving the battery Charging time and recordable timeWhen the cassette holder does not Come out When the cassette holder cannot be HousedInserting/removing a cassette Inserting/removing the cassetteCard access lamp Inserting/removing a cardConcerning the card SD Memory CardSelecting a mode How to use the joystickTurning the camera on Switching the language Card recording mode AUTO/MANUAL/FOCUS switch is set to AutoSet Language select the desired language Using the menu screen About the menu settingOperating with remote control To exit the menu screenSetting date and time Adjusting LCD monitor/viewfinderRecharging the built-in lithium battery Adjusting the brightness and colour LevelUsing the remote control Remote controlOrder to increase the brightness Entire LCD monitor Changing the picture quality on LCD monitorInstall a button-type battery Remote control usable range Selecting the remote control modeConcerning the button-type battery About auto mode Recording modeCheck before recording Basic camera holdingOn-screen display in the tape recording mode Recording on a tapeConcerning the remaining tape time Indication on the screen Remove the lens capCheck the recording Blank search functionRecording still pictures onto a card Photoshot Stopping blank search midway ThroughOn-screen display in the card recording mode Concerning the focusing areaProgressive Photoshot Select the size of still pictures to be Recorded on a cardZoom in/out function Recording yourselfDigital zoom function To use the zoom microphone functionTo cancel the quick start when Power is set to OFF Quick startBacklight compensation function To return to normal recordingSoft skin mode To cancel the colour night view FunctionTo cancel the soft skin mode Night view functionsTo cancel the tele-macro function To cancel fadingTele-macro function Fade in/fade out functionSelf-timer recording Wind noise reduction functionRecording images for wide-screen TVs To cancel the image stabilizer function ≥Set to Tape Recording Mode Set Advance SIS onImage stabilizer function Continuous PhotoshotRecording in various situations Scene mode To cancel the scene mode functionRecording in natural colours White balance Manual focus adjustment Manual shutter speed/aperture adjustmentTo restore to automatic adjustment Manual iris/gain adjustment Shutter speed rangeIris/gain value range To adjust volume Settings on the audioPlaying back tape Slow-motion playback/ frame-by-frame playbackPress the Play 1 button on the remote control Variable-speed search functionTo return to normal playback Frame-by-frame playbackPlayback on TV Playing back cardTo display the on-screen information On the TV Deleting files recorded on a card To display multiple playback filesAbout the compatibility of still pictures To delete all filesWriting the printing data on a card Dpof setting Formatting a cardProtecting files on a card Edit mode Recording from a tape onto a cardCopying onto a DVD recorder or a VCR Dubbing ≥The image and sound are reproducedUsing the DV Cable for Recording Digital Dubbing ≥Set to Tape Playback Mode Audio dubbingBefore recording with audio dubbing To play back the sound recorded with Audio dubbingWhen you stop printing halfway Menu list Tape Recording MenuTape Playback Menu MenuSetup Setup Display -45-REMOTECard Recording Menu Picture Playback MenuMenus related to taking pictures Menus related to playback Other menusIndications Basic indicationsRecording indications Playback indicationsConfirmatory indications Textual indicationsFunctions cannot be used simultaneously There is no ink. Check the connected printerThere is no paper. Check the connected printer Check the connected printerBefore requesting repair Problems and solutions Power/Body Movie camera power cannot be turned onMovie camera power is turned off automatically Movie camera power does not stay on long enoughRemote control does not function Cassette cannot be removedNo operation other than cassette removal can be performed Screen has changed suddenlyHeadphones Original sound was erased when audio dubbing was performedPlayback Sound Different sounds are reproduced at the same timePush the Reset Switch is displayed Using MotionDV Studio 5.3E LE for DVDuring playback, Unplayable Card is displayed OthersAbout condensation About dirty headsAbout the movie camera About the battery Be sure to detach the battery after usePrepare spare batteries when going out for recording While carrying the movie camera, do not drop or bump itAbout the AC adaptor About the cassetteAbout the card Folder structure of the cardExplanation of terms LCD monitor/viewfinderPeriodical check-ups Automatic white balanceWhite balance Auto focusSpecifications SpecificationsHttp//panasonic.co.jp/pavc/global/cs This Site is English onlyPicture Index NumericsVQT0T87 VQT0T87 F1105Nm0 3000 a