Panasonic NV-GS180EB Recording on a tape, On-screen display in the tape recording mode

Page 21

Record mode

Recording on a tape

Remove the lens cap. (-8-)

(When the camera is turned on with the lens cap fitted, the automatic white balance adjustment may not function properly. Please turn the camera on after removing the lens cap.)

Set to Tape Recording Mode.

1Press the recording start/stop button to start recording.

2Press the recording start/stop button again to pause recording.

;

For the recording time on a tape, refer to -10-. Carry out a recording check (-22-) to verify that

the image is recorded properly.

In order to find the unrecorded section, carry out the blank search (-22-).

ªOn-screen display in the tape recording mode

1)

0h00m10s00f

R0:30

2)

3)¢

100

4)¢

5)¢

¢These indications are displayed only when the card is inserted.

1)Recording time elapse

2)Remaining tape time indication

3)Still picture size

4)Number of recordable still pictures (When no picture can be recorded, this indication will flash in red.)

5)Quality of still pictures

ªConcerning the remaining tape time

indication on the screen

The remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.)

During a 15 seconds or shorter recording, the remaining tape time indication may not be displayed or the remaining tape time may not be displayed correctly.

In some cases, the remaining tape time indication may display remaining tape time that is 2 to 3 minutes shorter than the actual remaining tape time.

Recording still pictures on a card while recording image onto a tape

You can record still pictures while recording image onto a tape.

Set to Tape Recording Mode.

1Press the [PHOTO SHOT] button fully while recording image onto a tape.

PHOTO

SHOT

For the number of still pictures to be recorded on a card, refer to -60-.

When recording pictures onto a card, the recording start/stop button is disabled.

You can select a picture quality for still pictures to be recorded. (-23-)

The sizes of pictures to be recorded are [640].

In order to record still pictures with higher quality, we recommend using the card recording mode.

If the wide mode is used, you cannot record

images onto the card.

The [PHOTO SHOT] button does not work if it is pressed halfway.

21

VQT0T87

Image 21
Contents Operating Instructions How to replace the Fuse Information for Your SafetyBefore Use AC AdaptorFiles recorded on a SD Memory Card Carefully observe copyright lawsPages for reference Menu operation flow is indicated by in the descriptionContents AC adaptor, DC input lead, AC mains lead Battery pack AccessoriesOptional Sales and Support InformationCamera Parts identification and handlingCassette holder Volume lever s /VOLrCassette cover Zoom lever W/TAdjust the belt length and the pad position Using the LCD monitorFitting the lens cap Grip beltPower supply Using the viewfinderFitting the battery Connecting to the AC outletRemoving the battery Charging time and recordable timeWhen the cassette holder cannot be Housed When the cassette holder does not Come outInserting/removing a cassette Inserting/removing the cassetteInserting/removing a card Card access lampConcerning the card SD Memory CardSelecting a mode How to use the joystickTurning the camera on Switching the language Card recording mode AUTO/MANUAL/FOCUS switch is set to AutoSet Language select the desired language About the menu setting Using the menu screenOperating with remote control To exit the menu screenAdjusting LCD monitor/viewfinder Setting date and timeRecharging the built-in lithium battery Adjusting the brightness and colour LevelRemote control Using the remote controlOrder to increase the brightness Entire LCD monitor Changing the picture quality on LCD monitorInstall a button-type battery Remote control usable range Selecting the remote control modeConcerning the button-type battery Recording mode About auto modeCheck before recording Basic camera holdingRecording on a tape On-screen display in the tape recording modeConcerning the remaining tape time Indication on the screen Remove the lens capBlank search function Check the recordingRecording still pictures onto a card Photoshot Stopping blank search midway ThroughConcerning the focusing area On-screen display in the card recording modeProgressive Photoshot Select the size of still pictures to be Recorded on a cardRecording yourself Zoom in/out functionDigital zoom function To use the zoom microphone functionQuick start To cancel the quick start when Power is set to OFFBacklight compensation function To return to normal recordingTo cancel the colour night view Function Soft skin modeTo cancel the soft skin mode Night view functionsTo cancel fading To cancel the tele-macro functionTele-macro function Fade in/fade out functionSelf-timer recording Wind noise reduction functionRecording images for wide-screen TVs ≥Set to Tape Recording Mode Set Advance SIS on To cancel the image stabilizer functionImage stabilizer function Continuous PhotoshotTo cancel the scene mode function Recording in various situations Scene modeRecording in natural colours White balance Manual focus adjustment Manual shutter speed/aperture adjustmentTo restore to automatic adjustment Manual iris/gain adjustment Shutter speed rangeIris/gain value range Settings on the audio To adjust volumePlaying back tape Slow-motion playback/ frame-by-frame playbackVariable-speed search function Press the Play 1 button on the remote controlTo return to normal playback Frame-by-frame playbackPlayback on TV Playing back cardTo display the on-screen information On the TV To display multiple playback files Deleting files recorded on a cardAbout the compatibility of still pictures To delete all filesWriting the printing data on a card Dpof setting Formatting a cardProtecting files on a card Recording from a tape onto a card Edit modeCopying onto a DVD recorder or a VCR Dubbing ≥The image and sound are reproducedUsing the DV Cable for Recording Digital Dubbing Audio dubbing ≥Set to Tape Playback ModeBefore recording with audio dubbing To play back the sound recorded with Audio dubbingWhen you stop printing halfway Tape Recording Menu Menu listTape Playback Menu MenuSetup Display -45-REMOTE SetupCard Recording Menu Picture Playback MenuMenus related to taking pictures Other menus Menus related to playbackBasic indications IndicationsRecording indications Playback indicationsTextual indications Confirmatory indicationsThere is no ink. Check the connected printer Functions cannot be used simultaneouslyThere is no paper. Check the connected printer Check the connected printerPower/Body Movie camera power cannot be turned on Before requesting repair Problems and solutionsMovie camera power is turned off automatically Movie camera power does not stay on long enoughCassette cannot be removed Remote control does not functionNo operation other than cassette removal can be performed Screen has changed suddenlyOriginal sound was erased when audio dubbing was performed HeadphonesPlayback Sound Different sounds are reproduced at the same timeUsing MotionDV Studio 5.3E LE for DV Push the Reset Switch is displayedDuring playback, Unplayable Card is displayed OthersAbout condensation About dirty headsAbout the movie camera Be sure to detach the battery after use About the batteryPrepare spare batteries when going out for recording While carrying the movie camera, do not drop or bump itAbout the cassette About the AC adaptorAbout the card Folder structure of the cardLCD monitor/viewfinder Explanation of termsPeriodical check-ups Automatic white balanceAuto focus White balanceSpecifications SpecificationsHttp//panasonic.co.jp/pavc/global/cs This Site is English onlyPicture Numerics IndexVQT0T87 VQT0T87 F1105Nm0 3000 a