Panasonic DMC-LS85 operating instructions Protect, When Multi has been selected

Advanced-Viewing

c[PROTECT]

You can set protection for the pictures you do not want to delete to prevent them from accidental erasure.

1

2

Select [PROTECT] on the [PLAYBACK] menu. (P18)

Press e/r to select [SINGLE] or [MULTI] and then press [MENU/SET].

3	Select the picture, and then
	press [MENU/SET] to set.

When [MULTI] has been selected

• Repeat these steps for each picture.

• The settings are canceled when [MENU/SET] is pressed again.

[SINGLE] [MULTI]

Press w/q to	Press e/r/w/q to
select the picture.	select the pictures.

4 Press [4] to return to the menu screen.

•Press [MENU/SET] to close the menu.

„Canceling all the [PROTECT] settings

1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].

2Press e to select [YES] and then press [MENU/SET].

3Press [MENU/SET] to close the menu.

• If you press [MENU/SET] while canceling protection, the canceling will stop halfway.

Note

•The protect setting may not be effective in other equipment.

•Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in memory or the card is formatted.

•Even if you do not protect pictures on an SD Memory Card or an SDHC Memory Card, they cannot be deleted when the card’s Write-Protect switch is set to [LOCK].

VQT1X05 73