Panasonic DMC-LS85 operating instructions LCD monitor, Flash

Page 93

Others

LCD monitor

The LCD monitor turns off although the camera is turned on.

•When the camera is not operated for a while, [POWER SAVE] or [AUTO LCD OFF] is activated for [ECONOMY]. (P22)

•If the LCD monitor turns off when you press the shutter button halfway, the batteries may run out.

The LCD monitor darkens during use.

•This camera automatically charges for ﬂash recording and may darken the LCD monitor for efﬁcient charge. The monitor may darken in the following cases;

-After ﬂash recording

-Just after turning the camera ON

-Just after setting to Recording Mode

-When adjusting the zoom or pointing the camera toward dark side

The LCD monitor lights up again to return to recording-ready condition after charging for ﬂash.

The LCD monitor becomes darker or brighter for a moment.

•This phenomenon appears when pressing the shutter button halfway to set the aperture value and does not affect the recorded pictures.

•This phenomenon also appears when the brightness changes when the camera is zoomed or moved. This is because of operation of the automatic aperture of the camera, and it is not a malfunction.

The LCD monitor ﬂickers indoors.

•The LCD monitor may ﬂicker for a few seconds after turning the camera on indoors under ﬂuorescent light. This is not a malfunction.

The LCD monitor is too bright or dark.

• Is the [POWER LCD] or the [HIGH ANGLE] mode activated? (P22)

Black, red, blue and green dots appear on the LCD monitor.

• This is not a malfunction. These pixels do not affect the recorded pictures.

Noise appears on the LCD monitor.

•In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not affect the pictures you are recording.

Uneven colors come on the LCD monitor.

• If you press the LCD monitor with excessive force, uneven colors may appear on it.

Flash

Flash is not activated.

•Is the ﬂash setting set to Forced OFF [o]?

Change the ﬂash setting. (P36)

•Flash Mode is not available when [BURST] (P58) in [REC] menu has been set.

•Flash is not available depending on Scene Mode. (P37)

The ﬂash is activated 2 times.

• The ﬂash is activated twice when Red-eye Reduction (P36) has been set.

VQT1X05 93

Image 93

Contents DMC-LS86 Dear Customer Information for Your SafetyFCC Note Following Applies only in the U.S.A„ About the batteries Following Applies only in Canada„ Read together with the Cautions for Use. P84 Contents Connecting to other equipment Advanced-ViewingOthers Insert the batteries Quick GuideTurn the camera on to take pictures Play back the picturesCD-ROM Standard AccessoriesNames of the Components Before Use „ Battery life „ Battery indication„ Usable batteries „ Unusable batteriesRecording conditions by Cipa standard Inserting/Removing the Batteries/Card Optional About the Built-in Memory/the Card Type of card Characteristics SD Memory Card 8 MB to 2 GBCard Sdhc Memory Card 4 GB toTurn the camera on Setting Date/Time Clock SetPress Menu Sequence or time display format, and press e/ r to setMode switching About the Mode and Menu OperationPress MENU/SET to display the menu About the menu operationPress e/r to select a setting Press e/r to select a menu itemPress q Using the quick menu Travel Setup Location OFF/SET About the Setup Menu$VOLUME BeepLCD Mode STANDARD/LARGEEconomy @ Version Disp OFFDemo Mode JITTER, SUBJ. Move Demo LanguageENGLISH/DEUTSCH /FRANÇAIS Side and stand with your feet slightly apart Taking Pictures Using the Automatic FunctionPress the shutter button halfway to focus Press the shutter button fully push it in further, and takeScene detection „ Face detection„ The backlight compensation Setup menu Settings in Intelligent auto modeSettings of the following items are ﬁxed About the ﬂashSlide the recording/playback switch to Press Mode Taking Pictures with Your Favorite SettingsRecording/playback switch Press e/r to select Normal Picture and press MENU/SETFocusing Taking Pictures with the Zoom Preventing jitter camera shakeDirection detection function „ How the extended optical zoom works Slide the recording/playback switch a to Playing Back Pictures Normal Playback ModePress w/q to select the picture Displaying multiple screens Multi PlaybackUsing the playback zoom Deleting PicturesTo delete a single picture Press e/r/w/q to select the picture To delete multiple pictures up to 50 or all the picturesThen press Display to set. Repeat This stepSelect Large in the Display Size in Setup menu. P22 Press Display to switch the screen to be usedRecording Mode About the LCD MonitorTaking Pictures Using the Built-in Flash Switching to the appropriate ﬂash settingPress q t Press e/r to switch the ﬂash setting „ The available ﬂash range to take pictures „ Available ﬂash settings by Recording ModeFlash setting Shutter speed Sec „ Shutter speed for each ﬂash settingPress r p Taking Close-up PicturesTake the pictures „ Focus rangePress w s Taking Pictures with the Self-timerPress e/r to select the time Then press it fully to take a picturePress e d to display Exposure and press Compensating the ExposureTo compensate the exposure Press MENU/SET to ﬁnishTaking Pictures that Match the Scene being Recorded Portrait „ Technique for Self portrait modeWSOFT Skin ESELF PortraitSports SceneryYNIGHT Portrait UNIGHT SceneryParty PCANDLE LightABABY1 / sBABY2 Sunset PETZHIGH Sens XHIGH-SPEED BurstFireworks CSTARRY SKYBeach „ Technique for Aerial photo modeSnow MAERIAL PhotoChanging the settings for the picture quality Motion Picture ModePress the shutter button fully to stop recording Press e/r to select REC Quality and thenQvga Press e/r to select the item and then press MENU/SETRecording which day of the vacation you take the picture Useful Functions at Travel Destinations„ Canceling the travel date Enter the locationPress MENU/SET twice to close the menu Take a picture Then press q. P21 Select World Time from the Setup menu,Press r to select HOME, and then press Menu Press w/q to select the home area, and thenFor details on REC menu settings, refer to P18 Using the REC MenuPicture Size QualitySensitivity White BalanceApplicable modes AUTO/80/100/200/400/800/1600 „ Auto White Balance AWB „ About 3 Face detection $AF ModeApplicable modes OFF/ON BurstColor Mode NCLOCK SET AF Assist Lamp„ Operations performed during slide show Playing Back Pictures in Sequence Slide ShowEffect SetupDuration RepeatSelecting Pictures and Playing Them Back ZFAVORITE PlayPress e/ r to select Favorite Play and then „ Operations performed during motion picture playback Playing Back Motion PicturesCalendar Using the Playback MenuYTITLE Edit For Multi settingPress e/r/w/q to select text and press Menu SET to register Press Display to set repeat, and then press MENU/SETSTEXT Stamp Press e/r/w/q to select Shooting DATE, AGE, Travel DateOr TITLE, and then press MENU/SET to set each item FRESIZE Reducing the picture size number of pixels Press e to select YES and press MENU/SETSelect Resize on the Playback menu. P18 Press e/ r to select Single or Multi and thenPress e to select YES and then press Menu Select the pictures and sizesSingle MultiSelect Rotate DISP. on the Playback menu. P18 KROTATE DispPress r to select on and then press Menu FavoritePress w/ q to select a picture which you want to Put on your favorites list, and then press rSelect Print SET on the Playback menu. P18 „ To print the date To setProtect When Multi has been selectedCopy Press w/ q to select the picture and then pressPress 4 to return the menu screen Press e/r to select PC, Connecting to a PCThen press MENU/SET Double-click on RemovableUsing a PC with an SD Memory Card slot or a card reader „ Disconnecting the USB connection cable safelyDouble-click Dcim folder Press e/r to select PictBridgePTP, and then Printing the PicturesSelecting multiple pictures and printing them Selecting a single picture and printing itPrint Settings When printing different pictures on 1 sheet of paper Using a printer with an SD Memory Card slotPlaying back pictures using the AV cable optional Playing Back Pictures on a TV ScreenPlaying back pictures on a TV with an SD Memory Card slot Screen Display „ In playback 84 VQT1X05 About the LCD monitor Bring charged spare batteries when going outAbout the Lens Dispose of unusable batteries„ Ni-MH batteries Nickel Metal Hydride „ Proper care and handling of batteriesFor service or transfer/disposal When not using the batteries for a long period of timeDo not bend or drop the card DisclaimerWhen not using the camera for a long period of time About the picture dataAbout tripods Message Display Please Turn Camera OFF and then on AGAIN/SYSTEM Error Memory Card Error Format this CARD?Memory Card Parameter Error Memory Card Error Please Check the CardTroubleshooting Batteries and power sourceShooting Subject is not focused properly Recorded picture looks rough Noise appears on the pictureMotion picture recording stops in the middle Flash LCD monitorPicture is not played back PlaybackRecorded pictures are not displayed Thumbnail is Displayed appears on the screenOthers TV, PC and printerAF assist lamp does not turn on Clock is resetCamera and batteries become warm Lens clicks„ Number of recordable pictures Number of Recordable Pictures and Available Recording TimePicture size 32 7M 32 2.5M P 3264 × 2176 pixels Wvga VGA Qvga „ Available recording time In Motion Picture ModeSpeciﬁcations Number of recordable pictures Metering modeISO sensitivity Shutter speedMass Weight DimensionsTerminal AV OUT/DIGITAL„ Connecting DC coupler and AC adaptor to the camera Digital Camera Accessory SystemFor USA and Puerto Rico Customers Digital Camera Accessory Order FormRequest for Service Notice USA and Puerto Rico Only Exchange for Defective Battery Pack Limited Warranty CoverageExcept Items Listed Below Exchange for Defective SD CardCarry-In or Mail-In Service Npcparts@us.panasonic.com Précautions à prendre pour le Canada Mise EN GardePropos des piles 110 VQT1X05 75, 77 IndexNumber of prints Memo 114 VQT1X05 Memo VQT1X05