Panasonic PV-DV53 Advanced Settings, For manual White Balance adjustment

Advanced Settings

White Balance

Auto White Balance (“AWB”) automatically maintains optimum color balance in most lighting conditions. However, when using Digital Functions, etc., you may get better results by using the manual adjustment.

3, 4, A, B

JOG KEY

1POWER

2AUTO/MANUAL

1 Set POWER to CAMERA.

2 Hold down AUTO/MANUAL for more than 0.7 second so that the “MNL” indication appears in the EVF or the LCD monitor.

3 Press JOG KEY repeatedly until “AWB” appears in the EVF or LCD monitor.

4 Rotate JOG KEY to select other modes. (See mode chart at left.)

•Hold down AUTO/MANUAL for more than 0.7 second to cancel the setting.

Camera

Mode			Description
		Automatically maintains optimum
AWB		color balance in most lighting
		conditions.
		When the source illumination is a
		halogen lamp.
		When shooting outdoors on a
		sunny day.
		The White Balance setting that
		was previously set manually.ote
*
		Note
	• When ZOOM is set to 10X or
		higher, White Balance cannot be
		adjusted.

*For manual White Balance adjustment:

A. Rotate JOG KEY to select “” .

B. Point the Palmcorder at a white object (full-screen) and hold JOG KEY down until “” indication stops flashing.

•If “” indication flashes when the

Palmcorder is turned on, the previous manual White Balance setting is in effect.

In the following cases, the “” indication flashes:

•The flashing indicates that the previouly adjusted White Balance setting is still kept. This setting will be kept until White Balance is adjusted again.

•Correct White Balance may not be attainable manually in poor lighting.

Note

•DISPLAY must be set to ALL for MF, AE,

W.BALANCE, HIGH SPEED SHUTTER, or IRIS to be displayed on the LCD or EVF.

•While “MAGICPIX” is displayed on the LCD or EVF, Manual White Balance is inoperable.

23