Before Using
Using the Built-in Light
To brighten the natural colors in a scene.
Note
•Using Light reduces battery time.
•Provide adequate ventilation if using Light in a hot environment for a long time.
•Set LIGHT to OFF when not in use.
•When replacing the bulb, see page 48.
Before you begin
•Connect the Palmcorder to a power source. (pp. 11, 12)
•Set POWER to CAMERA.
1 Hold down LIGHT for more than
0.7second to turn ON or OFF.
• “
” will appear on the screen.
1LIGHT
Caution
This light becomes hot during operation. Make sure nothing covers the light during operation.
Self Demo Mode
If no operation takes place for approx.
10 minutes after the AC Adaptor was connected to the Palmcorder and the POWER Switch was turned to CAMERA without inserting a Cassette, the Palmcorder is automatically set to Self Demo mode for introducing its function. To turn it off, follow steps 1~4 below.
[ EVF or LCD Monitor ]
3, 4
JOG KEY
2MENU
1POWER
Before you begin
•Connect the Palmcorder to a power source. (pp. 11, 12)
1 Set POWER to CAMERA.
2 Press MENU to display the CAMERA FUNCTIONS menu screen.
3 Rotate JOG KEY to select OTHER FUNCTIONS , and press JOG KEY to display the OTHER FUNCTIONS menu screen.
4 Rotate JOG KEY to select DEMO MODE , and press JOG KEY to select OFF.
•Press MENU to exit.
Note
•If any button is pressed or operated (except PLAY/MULTI, ZOOM and LIGHT), the Self Demo mode is canceled.
•The Self Demo mode can be started by setting DEMO MODE to ON and by exiting the menu.
To turn Self Demo back on:
•Set to DEMO MODE : ON in MENU screen.
8 |
|
Forassistance, pleasecall: |