Panasonic PV-DV53 Easy Cassette Eject/Insertion, Attaching the Shoulder Strap, Adjust the Length

Easy Cassette Eject/Insertion

•If the Palmcorder is connected to a power source, the cassette can be inserted and ejected without turning the Palmcorder on.

4PUSH 2TAPE EJECT CLOSE

1LCD-OPEN Cassette Compartment

Cover

Before Using

Before you begin

•Connect the Palmcorder to a power source. (pp. 11, 12)

1 Press LCD-OPENto unlock the LCD monitor, and swing it fully open.

2 Slide TAPE EJECT to open the Cassette Compartment Cover.

3 Insert a cassette record tab up, window side facing out.

4 Press PUSH CLOSE to close the Cassette Compartment Cover.

•To remove the cassette...

Slide TAPE EJECT to open the Cassette Compartment Cover and pull the cassette tape straight out.

Note

•When inserting the cassette, make sure it is facing the right direction and then push it in completely.

Before Use

Attaching the Shoulder Strap

1 Undo the two strap ends from their buckles.

2 Thread the strap ends through the Strap Attachment Rings.

3 Reinsert the strap ends through their

buckles.		2
• Make sure the straps	3
are not twisted.		1

Adjust the Length

1 Loosen the strap from the Buckle and create a loop.

2 Pull the strap firmly through the Buckle to shorten or lengthen the

strap. 1

Hand Strap

Adjust the length of the Hand Strap to the size of your hand as illustrated.

12

3

Hand Strap

Lens Cap

Attaching the Lens Cap Strap:

Thread the Lens Cap Strap through the Strap Attachment Ring as shown.

Attaching the Lens Cap Strap to the Hand Strap:

Remove the Hand Strap from the front clasp and thread the Strap through the loop in the Lens Cap Strap.

Reattach the Hand Strap.

7