Panasonic PV-DV53 operating instructions High Speed Shutter, Auto Shutter

Page 25

Advanced Settings

High Speed Shutter

To record high speed motion (e.g. tennis stroke) with improved STILL or SLOW MOTION playback when watching the tape on this Palmcorder.

Auto Shutter

In the AUTO mode (no indication in the EVF and LCD monitor), the Palmcorder will automatically adjust the shutter speed (up to 1/350).

AUTO mode is automatically selected whenever the POWER Switch is set to CAMERA.

Manual Selection

3, 4

JOG KEY

1POWER

2AUTO/MANUAL

Note

For proper color reproduction, it is recommended that you use this feature outdoors. For indoor High Speed Shutter recording, additional halogen or tungsten light should be provided. Fluorescent light will degrade the picture quality.

This feature requires ample light. More light is required for the fastest shutter speeds.

The Auto Focus system may not operate properly in insufficient light when using the High Speed Shutter.

When PROG.AE is ON, you cannot manually select the shutter speed.

When MagicPix is ON, H.S.S. cannot manually select the shutter speed.

When PROGRESSIVE is set to ON, the shutter speed cannot be adjusted to 1/750 s or faster.

1 Set POWER to CAMERA.

2 Hold down AUTO/MANUAL for more than 0.7 second so that the “MNL” indication appears in the EVF or the LCD monitor.

3 Press JOG KEY repeatedly to display the shutter speed.

4 Rotate JOG KEY to choose one of the following shutter speeds.

Hold down AUTO/MANUAL for more than 0.7 second to cancel the setting.

EVF/LCD

Camera

25

Image 25
Contents Operating Instructions Things You Should Know Safety PrecautionsAbove markings are located on the appliance bottom cover PV-DV53Important Safeguards Important Safeguards Table of Contents How to remove the Sensor tag Before UsingUnpack your Palmcorder Record Speed/Playback TimeEasy Cassette Eject/Insertion Adjust the LengthAttaching the Shoulder Strap Hand StrapSelf Demo Mode Using the Built-in LightSet Power to Camera To turn Self Demo back onQuick Guide Insert the Battery PackInsert Cassette Monitor, and swing it fully openTo Watch Playback in the LCD Liquid Crystal Display Camera RecordingInsert the Battery Pack Remove the Battery Pack Charge the Battery Pack on the AC AdaptorAbout the Flashing of the Charge Lamp Batt ReleaseBattery Care Supplying PowerUse AC Adaptor Set the Date and Time Setting the ClockCamera VCR Functions ExampleDisplaying the Menu Using the Palmcorder MenuCamera Main menu VCR Main menuCamera Recording To conserve powerSimple Recording EVFTo adjust the LCD/EVF Brightness or Color Using the LCD MonitorStart recording EVF/LCDProgressive PhotoShot Mode Digital PhotoShot ModeSet Power to Camera Press Photoshot in Record/Pause Press Photoshot in Record/Pause modeZoom Set Power to Camera Zoom slowlyRecording Check Zoom quicklyRecording Still Pictures JOG KEY 2MENU 5REC Pause 1POWERSelf Recording 2STILLCinema Mode Special Effect FeaturesBacklight Start recording Press Back Light to activateProgram AE Fade Audio/Video Fade In/OutFade Out For manual White Balance adjustment Advanced SettingsWhite Balance Following cases, the indication flashesManual Focus Auto FocusMacro Focus for close-ups Auto Shutter High Speed ShutterAdjusting the Iris Manually Connecting Earphone not supplied Playback using the LCDPlayback Your Recordings MonitorRepeat Playback Adjusting the VolumeBlank Search EVF/LCDRStill Picture Rapid Visual SearchFast Forward/Rewind Check REWIND/SEARCHVariable Speed Search Rotate JOG KEY to adjustJog Frame by Frame Search JOG KEY 1PLAYFast Strobe Multi ModeNormal SlowTV with AUDIO/VIDEO in Jacks View Recording/Playback on your TVOUT Start playback or begin a recordingDigital Zoom Digital FeaturesSet Power to VCR JOG KEY 2MENU 1POWER 5PLAYMagicPix Images Dual Digital Electronic Image Stabilization System D.E.I.S Power 3REC/PAUSE BplayI.S. may not function when To use the Wipe function Other Digital FunctionsTo use the MIX function Picture in Picture PinP KEY 1POWER 2MENU 7REC Pause Camera StillMain Picture Picture in Picture PinP still image PhotoshotAudio Dubbing using the Built-in Microphone Editing FeaturesSet Power to VCR Press PLAY. Then press 12 bitMIX 7PAUSEPress Pause to stop Audio Dubbing Monitor with your TV Copying your Tapes to VHS CassetteRecording Palmcorder Copying from Digital Equipment dubbingPause 6STOP 4REC Insert a pre-recorded tape intoPC Connection with DV Interface Cable i.LINK PC ConnectionSystem Requirements for Photovu Link Driver Optional Photovu Link Driver OptionalConnection Running the Software Photovu Link OptionalUsing Tape Image Data Palmcorder Accessory System Visa Palmcorder Accessory Order FormHandle bulb gently. Excessive force may cause bulb to crack Replacing the BulbMixture Approximate Brightness ValuesSpecifications Cleaning Care for Video Heads Before Requesting ServiceTape Operations Caution Lens Hood Area Operation CautionSymptom Correction Request for Service NoticeFor On-Screen Displays OSDLimited Warranty Limited WarrantyAccessory Purchases Customer Services DirectoryAdvertencia del FCC Precauciones para su seguridadInserte el Cassette Inserte de la bateríaCuando el monitor LCD se enchuentra Grabación con la cámaraTotalmente abierto, el visor se Desactiva AutomáticamenteCamera Mode Menu Screen Beep Sound 10 11VCR Mode Menu Screen REC Speed p 11 C.RESET pAudio DUB p Important Note CAMERA/VCR ModePhoto RECPause CHKFront View Index of ControlsSide View Rear ViewBack View Top ViewTripod Receptacle AC Power Cord pp VCR DC Output Connector Power Lamp Charge LampUnderside View AC Adaptor Menu OSD IndexPhotovu Link