Panasonic AK-HC1800N operating instructions Control exercised from the AW-CB400, Bar

Page 18

How to set up the system

Control exercised from the AW-CB400

When using the AW-CB400 for the AK-HC1800N, its switches and dials function as shown in the figure below.

For capturing the camera statuses, and synchronizing the data. (Statuses of panel switches only)

For setting DTL to either ON or OFF.

For selecting GAIN L, M, H or S1.

• S2 and S3 cannot be set.

For switching between CAM or

BAR.

For controlling the MASTER

PEDESTAL. (−150 to +150)

For controlling IRIS AUTO,

MANU and LOCK.

For controlling the iris when

IRIS is set to MANUAL.

For switching the GAIN/PED display and controller setting menu display. For details on the camera’s functions, open the camera’s menu and select the settings.

When these switches are pressed while their lamps are off, the PRESET, USER1 and USER2 files are opened, respectively.

When any one of these switches is pressed while its lamp is lighted, the CURRENT file is opened. The switch lamp lights while the file is being opened.

For executing AWB.*1

For executing ABB.*1

For controlling R/B GAIN. (–150 to +150)

For controlling R/B PED. (–100 to +100)

These are the OPTION switches, and each switch makes it possible to control one of the items listed below. (The items are set on the controller setting menu.)

•Camera menu operations

A:MENU B: ENTER

C: UP

D: DOWN

•ZOOM TELE/WIDE control

•FOCUS NEAR/FAR control

•ND FILTER control

•DIGITAL EXTENDER control

*1: The lamp of the ABB or AWB switch flashes while automatic white balance or automatic black balance is being executed, respectively. When ABB or AWB is completed successfully, the corresponding lamp goes off; when it is not completed successfully, it lights up.

When changing the panel display for use with the AK-HC1800N, please use panel sheet VGKB0008 (sold separately as a replacement part).

Ver.2.00 or a subsequent version of the AW-CB400 software must be installed in order for the AK‑HC1800N to be controlled using the AW-CB400.

To check the software version of your AW-CB400, contact your dealer.

- 18 -

Image 18

Contents Operating Instructions Multi Purpose CameraFCC Note Do not OpenIndicates safety information Important Safety Instructions Contents AccessoriesIntroduction CharacteristicsBit A/D conversion and brand-new DSP featured New 2/3˝ 2.2 million-pixel CCD is employed H Precautions for use DON’TSFront view Bottom view Rear view Lens mount  HD SDI output connector HD SDI OUT Interface cable specifications AK-HC1800N Tally output connector Tally OUT How to install How to set the lensHow to set up the system Configuration example 1 Connection of camera controllerConfiguration example 2 High-speed P/T system Configuration example 3 High-speed P/T system AW-PH650 Control exercised from the AW-CB400 BARProcedure for camera menu operation AW-RP655 When the LCD panel is in the pedestal adjustment modeMode How to set up the system Adjust the black balance Operation procedureAdjust the white balance Start shootingLens iris gain volume adjustment How to adjustFlange back adjustment for zoom lens Auto iris power zoom lensWhite balance adjustment Color temperature and white balance adjustment referenceBlack balance adjustment Gen-lock adjustmentIntelligent functions Automatic video level adjustment method Automatic color temperature adjustment method Using AK-HRP150G camera controller Setting of menu itemsHow to display the menus TOP menu Maintenance menu Black Shading DetectionCorrectdig OFF, on Pedestal -100 to +100 PEDESTAL, GammaPedestal -200 to +200 GammaDRS OFF, on Gamma OFF, onBlack Gamma OFF, on Cine Gamma Select Video REC, Film RECFlare Flare 000 toFlare OFF, on Knee Point -25.00% to +25.00% KNEE, White Clip When the Knee is set toManual Knee Point Knee SlopeKnee Level 100% to 109% White Clip OFF, on KNEE, White ClipKnee OFF, MANUAL, Auto High Color OFF, onDetail Detail OFF, on Knee Aperture OFF, onDetail Slim Detail OFF, on Detail SourceSkin Tone Detail Skin Tone DTL OFF, on Skin GET OFF, onIris Level 000 to Iris Mode LENS, CAMGAIN, Auto Iris Iris PEAK/AVE 000 toMode S.GAIN1, S.GAIN2, S.GAIN3 Super Gain35 to 0.75 DRS OFF -10 to +10 DRS on PED Offset -200 to +200Frame Mode Matrix Matrix Table A, BSAT/PHASE -63 to +63 Color CorrectionGain Select Setting menuLighting TUNGSTEN, Daylight LOW, MID, HIGH, S.GAIN1 toDigital Extender OFF Matrix Table OFF, A, BColor Correction OFF, on BAR SELAWB Active FormatStatus OFF, on AWB OKMenu on BAR OFF, on ABB OKOUT Range RGB Menu SEL Video MENU, Film MenuShutter Shutter Mode OFF, ON, Synchro Shutter SpeedSD-HD Phase CRS -4 to +4 PHASE-COARSE -060 to +060PHASE-FINE -045 to +045 SD-HD Phase Fine -99 to +99Protocol Protocol 1 toND-FIL CLEAR, 1/4, 1/16, 1/64 INTELLIGENT1Gain -6dB to 72dB Intelligent MANUAL, AUTO, LockAGC ATWCLEAR, 1/4, 1/16, 1/64, Auto INTELLIGENT1 Intelligent Mode AGC, ATW, AGC+ATWND Filter Select AGC Speed 1 toINTELLIGENT1 AGC Gain Step NORMAL, MAX HI Light Detect 01 toIris Range 1, 2 ATW Area 25%, 50%, 90%ATW Speed 1 to AGC Mode NORMAL, SPORTS, SN, User The AGC control mode is set hereMIX +00dB, +06dB Frame MIXINTELLIGENT1 SUB Menu INTELLIGENT2 Intelligent SET INTELLIGENT2ATW Width 1 to Iris on Lock LOCK, MANUAL, PanelCamera ID menu LOAD/STORE from Mode LOAD/STOREFile Operation menu ExecuteMenu list Setting of menu items Maintenance Color SAT/PHASE Correction Setting of menu items Appearance Unit inch mmSpecifications Input/output signalEastern Zone