Panasonic AK-HC1800N operating instructions Procedure for camera menu operation AW-RP655

Page 19

How to set up the system

When the camera is to be controlled from the AW-RP655 controller

Each time the MODE button is pressed, the setting is switched between CAM and BAR. The MODE button lights up at the BAR setting.

For executing AWB.*1

When the LCD is in the gain adjustment mode Select the desired gain setting from GAIN SELECT LOW to S.GAIN3.

When the LCD is in the pedestal adjustment mode

Adjust the M PEDESTAL setting (–150 to +150).

When the camera menu mode is established

Perform the camera menu operations.

For executing ABB.*1

When the LCD panel is in the gain adjustment mode

Adjust the R GAIN setting (–150 to +150).

When the LCD panel is in the pedestal adjustment mode

Adjust the R PEDESTAL setting (–100 to +100).

Switch between gain adjustment mode and pedestal adjustment mode.

When the LCD panel is in the gain adjustment mode

Adjust the B GAIN setting (–150 to +150).

When the LCD panel is in the pedestal adjustment mode

Adjust the B PEDESTAL setting (–100 to +100).

*1: The lamp of the ABB or AWB switch flashes while automatic white balance or automatic black balance is being executed, respectively. When ABB or AWB is completed successfully, the corresponding lamp goes off; when it is not completed successfully, it lights up.

In the case of the AK-HC1800N camera, the following buttons on the AW-RP655 will not work.

• WHITE BAL A/B/ATW

 

• GAIN AUTO/MANU

• DATA SET

When the AK-HC1800N, to which the motor drive lens is connected, has been directly connected to the AW-RP655 controller, zooming and focusing can be controlled using the controller’s joystick.

When changing the panel display for use with the AK-HC1800N, please use panel sheet VGKB0007 (sold separately as a replacement part).

Procedure for camera menu operation (AW-RP655)

1Press the MENU button to set the LCD panel display to the menu mode.

2 Turn the jog dial (main) to select CAMERA SETTING.

3 Press the OK button.

4 The right display appears on the LCD panel:

When the OK button is pressed again, the menu of the AK-HC1800N appears on the monitor.

5Turn the jog dial (main) to modify menu items of the AK-HC1800N and change the data. When changing the data, the data settings are decremented by turning the dial clockwise and incremented by turning it counterclockwise. Push the jog dial (main) down to enter the settings.

6To exit the camera menu, press the MENU button or R/B GAIN/PED button.

Ver.0010 or a subsequent version of the AW-RP655 software must be installed in order for the AKHC1800N to be controlled using the AW-RP655.

To check the software version of your AW-RP655, contact your dealer.

- 19 -

Image 19
Contents Multi Purpose Camera Operating InstructionsDo not Open FCC NoteIndicates safety information Important Safety Instructions Accessories ContentsNew 2/3˝ 2.2 million-pixel CCD is employed H  CharacteristicsBit A/D conversion and brand-new DSP featured IntroductionDON’TS Precautions for useBottom view Rear view Front view Lens mount  HD SDI output connector HD SDI OUT AK-HC1800N Interface cable specifications Tally output connector Tally OUT How to set the lens How to installConfiguration example 1 Connection of camera controller How to set up the systemConfiguration example 2 High-speed P/T system Configuration example 3 High-speed P/T system AW-PH650 BAR Control exercised from the AW-CB400When the LCD panel is in the pedestal adjustment mode Procedure for camera menu operation AW-RP655Mode How to set up the system Start shooting Operation procedureAdjust the white balance Adjust the black balanceAuto iris power zoom lens How to adjustFlange back adjustment for zoom lens Lens iris gain volume adjustmentColor temperature and white balance adjustment reference White balance adjustmentGen-lock adjustment Black balance adjustmentIntelligent functions Automatic color temperature adjustment method Automatic video level adjustment methodTOP menu Setting of menu itemsHow to display the menus  Using AK-HRP150G camera controllerBlack Shading Detection  Maintenance menuCorrectdig OFF, on Gamma PEDESTAL, GammaPedestal -200 to +200 Pedestal -100 to +100Cine Gamma Select Video REC, Film REC Gamma OFF, onBlack Gamma OFF, on DRS OFF, onFlare 000 to FlareFlare OFF, on Knee Slope KNEE, White Clip When the Knee is set toManual Knee Point Knee Point -25.00% to +25.00%Knee Level 100% to 109% High Color OFF, on KNEE, White ClipKnee OFF, MANUAL, Auto White Clip OFF, onKnee Aperture OFF, on Detail Detail OFF, onDetail Source Detail Slim Detail OFF, onSkin GET OFF, on Skin Tone Detail Skin Tone DTL OFF, onIris PEAK/AVE 000 to Iris Mode LENS, CAMGAIN, Auto Iris Iris Level 000 toSuper Gain Mode S.GAIN1, S.GAIN2, S.GAIN3PED Offset -200 to +200 35 to 0.75 DRS OFF -10 to +10 DRS onMatrix Table A, B Frame Mode MatrixColor Correction SAT/PHASE -63 to +63LOW, MID, HIGH, S.GAIN1 to Setting menuLighting TUNGSTEN, Daylight Gain SelectBAR SEL Matrix Table OFF, A, BColor Correction OFF, on Digital Extender OFFAWB OK FormatStatus OFF, on AWB ActiveMenu SEL Video MENU, Film Menu ABB OKOUT Range RGB Menu on BAR OFF, onShutter Speed Shutter Shutter Mode OFF, ON, SynchroSD-HD Phase Fine -99 to +99 PHASE-COARSE -060 to +060PHASE-FINE -045 to +045 SD-HD Phase CRS -4 to +4Protocol 1 to ProtocolIntelligent MANUAL, AUTO, Lock INTELLIGENT1Gain -6dB to 72dB ND-FIL CLEAR, 1/4, 1/16, 1/64ATW AGCAGC Speed 1 to INTELLIGENT1 Intelligent Mode AGC, ATW, AGC+ATWND Filter Select CLEAR, 1/4, 1/16, 1/64, AutoHI Light Detect 01 to INTELLIGENT1 AGC Gain Step NORMAL, MAXATW Area 25%, 50%, 90% Iris Range 1, 2ATW Speed 1 to NORMAL, SPORTS, SN, User The AGC control mode is set here AGC ModeFrame MIX MIX +00dB, +06dBINTELLIGENT1 SUB Menu INTELLIGENT2 INTELLIGENT2 Intelligent SETIris on Lock LOCK, MANUAL, Panel ATW Width 1 toCamera ID menu Execute Mode LOAD/STOREFile Operation menu LOAD/STORE fromMenu list Setting of menu items Maintenance Color SAT/PHASE Correction Setting of menu items Unit inch mm AppearanceInput/output signal SpecificationsEastern Zone